Original problem: the "stir" speed is the same as speed "2" (always has been). The new problem: after reading some comments at this site, I tried adjusting the screws holding the speed control plate ...
Question about KitchenAid Food Mixers
troubleshooting? No manual, try MFG customer website or phone. They may like to know you are having problems. They may know this is a problem and may send you a replacement free. I'm not familiar with
Question about Hobart Food Mixers
My Hobart D-300 keep stop after running about 10 minutes and stay idol about 5 minutes then I can push start button to run another 10 minutes, it seam like control unit stop after it getting over heat
the start bottom will not stay on it does work with something stack in it we change the botton but it does the same problem If it has a bowl guard on it then the problem could be either the bowl ...
beaters will not turn, motor runs.... They seem to have a plastic gear built in as protection for overloading (prob). When the machine counters to much resistance that gear will strip its teeth ...
A pop and motor quit motor was running then i heard a pop and it quit? waht should i check? MOTOR IS BURNED OUT nothing you can do this was the problem with this mixer for years , then it was the worm
...600? 6-qt. Bowl-Lift Bowl Stand Mixer nice machine!! enjoy using it. I assume you have no problems with it since no problems are
Kitchenaid kcms185jss5 recall problem issue Isn't this a microwave oven? and what is the problem?
I have a Hobart P660 stand mixer. It turns on for a moment then trips the breaker. Would this be a "relay" or "switch" problem? Hello Pizzaangel, It sounds like you are having a ...
Question about Food Mixers
...equipment. There is a slightly higher chance the power cord has an internal break but other common problems are with the internal safety device, the speed control, the switch or the motor brush
370 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: