Hobart A200 Stand Mixer "stator" Questions

Ad

how do i test the stator, this one has 4 wires 2 going to the little stator strands the other 2 going to the larger stator strands, i get audible continuity when one lead is grounded and the other tou

Ad

how do i check the stator on my a200 hobart mixer, or in other words ohm check the stator wiring someone had wired 2 of the stator wires together and the other 2 went to the switch a single pole ...

Ad

Question about KitchenAid Food Mixers

2 Answers

...I had this problem also: power to the motor, motor not running. Solution was simple: remove the 2 stators things from the sides of the main housing, clean all the black dust off them, re-insert and ...

Question about KitchenAid Food Mixers

2 Answers

...and stripped planetary gears. sorry to disagree but yes it will, both use the same armature and stator those two parts = the motor and both use the same phase control board and both use the same ...

Question about Food Mixers

1 Answer

Motor on K45 runs the wrong way K45 Claude change the connections. the stator motor is a magnetic motor so you just have to change the polarity, it's set wrong.

Question about KitchenAid Food Mixers

1 Answer

...wont turn on Any number of reasons such as: Bad electric cord Bad brush or brushes Bad armature or stator Control plate broken You need the Service

...motor direction. Is it a three-phase motor? If so, swap any two phases of the wiring. Motor stator is installed backward turn it around and this should correct the

Question about Sunbeam Food Mixers

1 Answer

...the electric current off. I have tried different outlets, always with the same result. your motor stator to the commutator is shorting between the copper bus bars and this welding of these bars ...

Question about Hobart Food Mixers

1 Answer

...Adam. Easy part first! Check locally for an electric motor specialist, who can rebuild (rewind) the stator for you. If no luck there, check out eBay for a complete motor (stator and rotor), they come ...

Question about Hobart Food Mixers

2 Answers

Hobart N50 stator assembly replacement Hi, I recently purchased a used N-50 mixer and need numerous replacement parts, the most important being the stator assembly. Although the machine seems to run ...

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

370 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...