GE Profile JTP18 Electric Single Oven "temp sensor" Questions

Ad

...temp sensor error the problem could be in your temp sensor or your ERC. If you unplug the appliance and remove the two screws holding in your temp sensor there will be a clip. Remove the clip and ohm ...

Ad

Question about Frigidaire Ovens

1 Answer

...temp sensor may need replaced but: If the oven temp sensor is not working, would the temp light still work? (the light that goes out when the oven reaches temp), Mine goes out but the oven seems to ...

Ad

Question about Frigidaire Ovens

2 Answers

...temp sensor. the sensor probe is not responding to the oven control. this will cause erratic temps in this oven. it will also damage the control board if the sensor isn't replaced soon. iwould check ...

Question about Frigidaire Ovens

1 Answer

...temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp ...

Question about Whirlpool Ovens

1 Answer

...temp sensor is damaged, or the temp sensor harness is faulty or worn. check the sensor for welded contacts and a bad harness connection as well. replace the temp sensor if found to be defective. ...

Question about Maytag Ovens

1 Answer

...temperature problem oven temp setting to 350 gets up to temp then it shuts down and does not hold the true temp. no fault codes appear. Change temp sensor or get new stove? Change the temp

Question about Ovens

1 Answer

...temp sensor. the control is not receiving a proper resistance signal from this sensor at this time. the control will shut down the unit if this is the issue. check the oven temp sensors connections ...

Question about Dacor Ovens

1 Answer

temp. sensor is bad. I pulled it but cannot get the plug thru the hole inside the oven so I can just plug the new one in. Can I cut the wires on both & hard wire with wire connectors the old wires

...temp sensor. If your unit's orientation is doubled, the top oven sensor will be the culprit. Some model will incorporate a sensor fuse at the wiring harness. Check the fuse, if equipped, for ...

Question about Frigidaire Ovens

1 Answer

...temp sensor failure notice. you will need to check the wires leading from the temp sensor to the control. if the wires are in good condition and , the sensor harness is not welded, replace the temp ...

Not finding what you are looking for?
GE Profile JTP18 Electric Single Oven Logo

440 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...