GE Profile JTP56 Electric Double Oven "disconnect ribbon cable" Questions

Ad

...ribbon cable, put in index card both sides of ribbon cable. Also, cleaned ribbon cable with eraser. Reinserted ribbon cable to ERC board. Flipped circuitbreaker several times to shock sysem. No good ...

Ad

Question about Kenmore Ovens

2 Answers

...ribbon cable that plugs into the relay board. The ribbon cable is actually two cables pressed together, which can be seperated by simply lifting them apart. The ribbon cable has a defect in that the ...

Ad

Question about GE Ovens

2 Answers

Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs If code recurs, problem is in the control. Replace control. If code does not recur, problem is with the Key Panel. First

Question about GE Ovens

2 Answers

...ribbon cable is poor. The conductors in the cable are crossed. The ribbon cable is actually two ribbons pressed together, and the conductors between the two cables are shorting or becomming crossed. ...

...disconnect the power to the oven. Take the 3 screws out above the door that hold the control panel on to the oven. Pull the control panel out at the bottom and lift it up, then pull out the top and ...

Question about GE Ovens

2 Answers

Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs If code recurs, problem is in the control. Replace control. If code does not recur, problem is with the Key Panel. Don't

...disconnect the ribbon cable in order to determine whether it is the key panel or control panel that is causing an F7 beeping error? The ribbon is in a connector that has to be pulled up to unlock. ...

Question about GE Ovens

2 Answers

...disconnect the ribbon connector which comes from the control panel and connects to the control board.take a piece of paper towel and clean its end and put it back.some times this works.do not forget ...

...ribbon cable on the keypad or the electronic control assembly itself going bad. To resolve this issue first, disconnect the power to unit and then gain access to the back of the clock assembly ...

ribbon cable from the front panel was not making good contact where it mated with the circuit board. Remove ribbon cable and clean contacts on ribbon cable. Replace cable and problem should resolve. I

Not finding what you are looking for?
GE Profile JTP56 Electric Double Oven Logo

344 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...