GE Profile JTP56 Electric Double Oven "wiring heating element" Questions

Ad

wiring or a control. So far as the heating element, you should be able to remove it and using an ohm meter, get some sort of reading if it is good (I have no idea what though). Or open circuit if bad.

Ad

Question about Ovens

1 Answer

...heating element Turn off power to oven, remove two screws on heating element mount, pull heating element from wall of oven, remove two screws connecting electric leads to heating element. To install ...

Ad

...heating element is bad. they can look fine and be bad. usually they are very easy to replace. Just make sure the power is off to the oven before attempting to remove the element. There is usually ...

heating element in a built in aeg fan oven I have removed a back panel and unscrewed the heating elemtent which then reveals a red and blue wire which are attached to the element. How do I then remove

Question about Frigidaire Ovens

2 Answers

heating element back to where it goes through the wall of the oven. Remove the bracket that secures the element in place. Unscrew or unfasten any stand-off supports that secure the element to the oven

...heating element mount on wall of oven. Pull heating element from wall of oven far enough out to see the where the wires/lugs are screwed to the heating element leads. Remove these screws. Replace ...

Question about Kenmore Ovens

2 Answers

...heating element of your Kenmore Elite Gas range. The heating element is either defective or may have loosed contact as a result of heat coming out of the Oven. The heat coming from the oven may have ...

Question about Ovens

1 Answer

My oven will not heat up. When I turn the oven on the lights indicate that the oven is on but it never heats up. The stove works fine. check the back element to see if it is burnt out ...this is most ...

...wiring to determine the cause before replacing the fuse. THINGS TO CHECK: the broil element is the heating element that is found at the top of the oven and produces a very high heat for broiling. If ...

through the front, and install the new one. Note that if you break one of the connections on the wires to the heating element, they can be a real chore to repair because they are high heat connections

Not finding what you are looking for?
GE Profile JTP56 Electric Double Oven Logo

344 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...