GE WSXH208A Front Load Washer "gasket twisted" Questions

Ad

Question about Miele Washing Machines

1 Answer

...gasket is twisted, how do I fix it? The front door gasket is twisted. I would like to straighten it out. There is a metal retainer with a spring on the outside of the door around the seal remove that ...

Ad

...gasket was twisted on right side and inside out what happened ,can i fix myself? Something probably got caught in the seal and pulled it out of place. If u run washer so that it fills up and starts ...

Ad

Question about GE Washing Machines

1 Answer

...gasket is all twisted up. I can't straighten up the gasket. What happened? Sounds like drum suspension gone or top spring/ springs broken check this 1st refit if just fallen off, quite tight to ...

...gasket seal was twisted. Not sure how to realign it. The only way to realign this is toremove the sping under the lip at the door portion of the seal,this is a tough one youll need a third and forth ...

...twisted in the rubber gasket now it wont spin about 10 peices of clothing got so twisted in the bellow i thought i was going to have to cut them the washer must not have stopped the cycle the rubber ...

Question about Whirlpool Washing Machines

1 Answer

...prepared for a lot of water. now you can use a hose clamp or you hand to hold back water from the gasket that goes from the bottom tub to pump . remove clog and reverse steps . i hope this ...

We discovered that our front door inner gasket is torn. Therefore, it's leaking during every load out of the door. I will be ordering the part but concerned that I won't be able to replace it. Do you ...

Question about Whirlpool Washing Machines

1 Answer

The front gasket to twisted. No error number. How can it be straightened? SLOWLY TAKE THE CLOTH OUT AND PUT IT BACK IN THE FRONT

twisted. This can often be cured by twisting the door so the bottom is making a better seal against the gasket. This is assuming there is not tear or cut on the door bellows (gasket). Water tracks can

duet front load rubber gasket in between door and tub starting to twist how do i prevent this from happening ur loads. might be too much.

Not finding what you are looking for?
GE WSXH208A Front Load Washer Logo

1,215 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

geapptech

Level 2 Expert

157 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...