Midland 77-092 40-Channels Base CB Radio "wire mic" Questions

Ad

Question about Cobra Radio Communications

1 Answer

wire. Pin #2 on mic connector - White wire. Pin #3 on the mic connector - Blue wire. Pin #4 on the mic connector - Red wire. If you look on the end of the mic connector it will have the imprint of the

Ad

...mic pin need to wire a silver salute cb mic to a cobra 142 gtl what color wire goes to what pin on the mic plug thank dont go by colors.. go by what wires are on the switch and mic element.. mics can ...

Ad

Question about Magnum Radio Communications

6 Answers

...mic I can use do you have the wiring color code sharmans dm-520p mic it goes on zodiac m-144 I have a Telex (RK56) mic need to wire it to a Corba 19 Ultra III 4 pin.Thank ...

...other should then be your audio which will be connected to the mic element.. using this method you can wire any mic to any radio.. pending the mic element ohm value impedance is correct for the

Question about Cobra Radio Communications

1 Answer

...5 pin diagrams on the internet, but nothing on the wiring inside the mic itself. Am I missing a wire? Where can I find wiring diagrams for inside the mic? Larry why not just purchase a 5 pin for

Question about Connex Radio Communications

1 Answer

...Wire MIC. Wiring 1. Ground Shield 2. Audio White 3. Transmit Black 4. Receive N/C 5. CH. UP N/C 6. CH. Down N/C Turner 6-Wire MIC. Wiring 1. Ground Shield & Red 2. Audio White 3. Transmit Blue 4. ...

Question about Cobra Radio Communications

1 Answer

...mic wiring is PIN #1- Shield or ground wire PIN#2- Audio or Transmit modulation PIN #3- Transmit or Dead Key PIN #4- Receive Audio. When your keying the mic, the RX wires are being connected to make ...

Question about Maxon Radio Communications

2 Answers

...I need the mic wire instructions for a maxon model number mcb 40 4 pin mobile cb radio? try http://www.cbtricks.com/ they have mic wireing diagrams whats wire diagram on a general lee 10 meter

Question about Cobra Radio Communications

1 Answer

...the back of the mic jack in the radio. Broken wire in the mic cord. Disconnected wires in the mic for the switch. Dirty mic connection pins.Most likely the problem is with the mic, and not the

Question about Uniden Radio Communications

1 Answer

...to a 5 pin how to wire a dm-452 superstar 4 pin mic to a 5 pin uniden washington it's not possible to wire 4 wire mics to the uniden 5 wire radios without modifying the mic and replacing the mic ...

Not finding what you are looking for?
Midland 77-092 40-Channels Base CB Radio Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

lars ahlsen

Level 2 Expert

47 Answers

Jason

Level 2 Expert

218 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...