HP ProCurve 2524 24x10/100 Mbps Networking Switch "hyperterminal settings" Questions

Ad

Question about HP ProCurve Computers & Internet

1 Answer

...via a serial connection to the switch using hyperterminal with the following settings bits per second 9600 data bits 8 parity none stop bits 1 flow control none let me know if this resolves the ...

Ad

Question about Power Dsine Computers & Internet

1 Answer

...settings for PowerDsine PD-6024/AC for hyperterminal What are the hyperterminal setting for the "pd-6024/AC" hub. The ones on the website do not and work and Microsemi dont answer their phones. Is ...

Ad

Question about Computers & Internet

1 Answer

TO THE RS232 CONSOLE PORT. WHAT IS nuswitch ds16 CANT CONNECT TO THE RS232 CONSOLE PORT. WHAT IS THE PORT SETTINGS? Just click on default settings in hyperterminal?? if u had not set any in ur router?

Question about HP ProCurve Computers & Internet

1 Answer

...through hyperterminal. I've set all the settings like it says to in the manual but I just get a blank screen. I'm not sure if this switch's serial port baud rate can be changed. Try various

Question about HP ProCurve Computers & Internet

1 Answer

...settings such as ip address and factory defaults can be set through the Console Interface (CLI). You will need a null-modem cable to access this and a terminal client (Windows Hyperterminal works). ...

Question about 3Com Computers & Internet

2 Answers

...Hyperterminal default settings would allow you to connect. Your superstack 3 should have a 9 pin male connector at the back labeled "console port" you need to connect this to your serial interface on ...

Question about Lucent Computers & Internet

3 Answers

settings sounds correct for your serial comms etc.. if you can see the data coming in on the screen (ie user prompt). Check your serial cable to ensure you have actually wired it up correctly, perhaps

Question about HP ProCurve Computers & Internet

1 Answer

...others with problem. One just shows all the port LEDs on and doesnt start at all (connecting with HyperTerminal - nothing on the screen) and the second one starts well, shows all the logs on the ...

Question about Foundry Networks Computers & Internet

2 Answers

...Your new password is set now as 'admin' Best Regards how / where do you enter 'b'? Is that in hyperterminal. I cant get this to work or get any response from the Fastiron Edge 2402's I have but ...

Question about NorStar Computers & Internet

1 Answer

...hyperterminal comm settings should be 9600 baud, 8 data bits, one stop bit, no parity, and flow control disabled...assuming no one changed the default console settings on the switches. If you are ...

Not finding what you are looking for?
HP ProCurve 2524 24x10/100 Mbps Networking Switch Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...