LG LP153HD3A - 14,300 BTU, R410A, 9.4 EER, Heat PumpPTAC, 230V "makes heat pump work compressor" Questions

...heat pump? Is it a heat pump stat? Is ambient temp high enough to allow heat pump to run? Check and make sure the thermostat is programmed to bring on the heat pump before the emergency heat. If heat ...

...Heat-pump, furnace(heat source) and the thermostat and that the thermostat is capable of controlling a heat-pump with secondary/emergency heat units. Thermostats designed for this have 4 settings: ...

...heat pump. Compressor is working, however reversing valve is stuck in cooling mode. Need HEAT! Can this be fixed without replacing entire compressor? yes it can be fixed with a reversing valve ...

...heat pump is very close to 100% efficient , so it makes no sense to get the wear and tear on the mechanics of the unit, so it switches to resistance heat which is also at 100% efficiency with no ...

...heat pump... i know still doesnt change that your unit is stopping in mid cycle ,but maybe it is bringing on the auxillary heat inside when it does this... does the fan outside continue to blow if so ...

...heat pump, I dont know why it does I have Amana heat pump, I dont know why it does not work then I unplug the power then I plug in then it work but It it run for a day then does not work again So i ...

heat pump package unit compressor draws high amps and keeps going up until it blows the 40 amp fuse on heat only. and on cooling only works for a minute or two and shuts off and starts again but draws

...heat pump a/c unit installation Condensing motor works, blower motor works, every thing starts except compressor and suction reads 300 and head reads 300 with a r410a syatem. New unit and it will not ...

...heat pump Model #630515.321El Serial #21631212 Yr. 2003. It is the rear unit, front unit working fine. In AC mode it is blowing hot air as if the heat pump is on. Fan and compressor are working. ...

...work. Putting R+G+W together will start AC, but will not start heat. what am I doing wrong? I installed per written instructions manual that came with unit. Will not work! By combining R + W + G as a ...