HP DeskJet 3650 InkJet Printer "sliding door guide rollers" Questions

Ad

Question about HP DeskJet Office Equipment & Supplies

1 Answer

...Door by sliding the latch to the left/right side...thoroughly clean all the rollers (Inside the printer & on the back door) with a soft cloth dipped in warm luke water...Leave it for 5 minutes to dry ...

Ad

Question about HP DeskJet Office Equipment & Supplies

1 Answer

...guide towards the paper until it stops. NOTE: Not all HP Deskjet printers have rear access doors. Skip this step if your printer does not have a rear-access door. Remove the rear-access door (if ...

Ad

Question about HP DeskJet Office Equipment & Supplies

1 Answer

door, or the automatic two-sided printing accessory, and check for any paper jams or paper obstructions. Remove any obstructions. Check to make certain the carriage is on the right side of the printer

Question about HP DeskJet Office Equipment & Supplies

2 Answers

...guide. Solution two: Make sure that the HP All-in-One is within skew tolerance Follow these steps to determine if the product is within skew tolerance. Step one: Print an extended self-test report ...

Question about HP DeskJet Office Equipment & Supplies

1 Answer

door or duplexer into place, and then gently push it in until it clicks or snaps into place. Reconnect the power cord to the rear of the product. Try printing again. If these steps resolved the issue

Question about HP DeskJet Office Equipment & Supplies

5 Answers

door, or the automatic two-sided printing accessory, and check for any paper jams or paper obstructions. Remove any obstructions. Check to make certain the carriage is on the right side of the printer

Question about HP DeskJet Office Equipment & Supplies

1 Answer

...rollers to dry completely, and then replace the rear access door or duplexer. f) Slide the rear access door or duplexer into place, and then gently push it in until it clicks or snaps into place. g) ...

Question about Office Equipment & Supplies

2 Answers

...sliding the guide toward the back of the printer. Reinstallation tip Make sure that both tabs snap back into place when reinstalling the duplexer inlet guide. 4. Disconnect two cables at the left, ...

Question about HP Office Equipment & Supplies

1 Answer

...door forward until it snaps into place. Plug the power cord into the product again. Press the Power button ( ) to turn the product on. Try the print job again. If these steps resolved the issue , you ...

Question about Canon Office Equipment & Supplies

1 Answer

...door is off, you will see a black plastic cover just above where you removed the retainer from. One screw removes that to expose the connectors for the fuser. There is a black plastic guide that runs ...

Not finding what you are looking for?
HP DeskJet 3650 InkJet Printer Logo

289 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...