Kicker Solo-Baric L7 S15L72 Car Subwoofer "voice coil" Questions

Ad

Question about AudioBahn Car Audio & Video

1 Answer

voice coil the equivalent of 500 watts of power at 4 ohms. The other way would be to run the voice coils in series (voice coil 1 - terminal to - speaker terminal on the amp, voice coil 1 + terminal to

Ad

Question about Soundstream Car Audio & Video

1 Answer

...voice coil, i believe 2 ohms per voice coil. the 500sx amp is rated 4 ohms bridged at 500 watts, it is capible of dropping to 2 ohms sterao, but no lower than 4 ohms bridged. to get maximum ...

Ad

Question about Lanzar Car Audio & Video

1 Answer

...voice coil lanzar 15 for 4 ohm? Hello dexterchapma, The only way to wire a single 4ohm DVC sub to present a 4ohm load is to just connect one voice coil. If you wire the coils in parallel, you get a ...

Question about Kicker Car Audio & Video

1 Answer

...voice coil wiring. Option 1 (parallel/parallel) = 1 ohm load Voice coils wired in parallel, speakers wired in parallel Recommended Amplifier: Stable at 1 ohm mono Option 2 (series/parallel) = 4 ohm ...

...voice coil subwoofer, the sub has 4 speaker wire connections coming out the back how do i bridge it two one You have two choices of how to wire this sub. First, is an 8 ohm load. This is called a ...

Question about Performance Teknique Car Audio & Video

1 Answer

...voice coil (either is OK). 8-ohm = voice coils in series (connect the positive of one voice coil to the negative of the other and connect the remaining positive and negative to your speaker amp out ...

Question about Lanzar Car Audio & Video

2 Answers

...voice coil 2 ohm Do you have just one???? If so and your amp can handle a 1 ohm load, hook one voice coil to the other (positive to positive, neg to neg) then bridge it to the amp...If not you will ...

Question about Car Audio & Video

1 Answer

...voice coil, dual oice coil. your amp is no lower than 2 ohms stable mono. the proper way to wire this so that you do not burn out the amp is to run the 2 vioce coils in series. run the positive lead ...

Question about Jl Audio Car Audio & Video

1 Answer

...voice coil to another, a jumper. connect positive from one voice coil to the neg of the other voice coil. Then connect the remaning positive on one voice coil and the neg from the other voice coil to ...

Question about Power Acoustik Car Audio & Video

1 Answer

voice coil on each one with the two of them wired in series. Using both voice coils, you can get a 1/4ω load by wiring the voice coils in parallel and then wiring the subs themselves in parallel.

Not finding what you are looking for?
Kicker Solo-Baric L7 S15L72 Car Subwoofer Logo

189 questions posted

Ask a Question

Usually answered in minutes!

Top Kicker Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

93 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Dalynn Turner

Level 2 Expert

346 Answers

Are you a Kicker Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...