Euro-Pro Shark 80 - 7133 "handwheel stuck" Questions

Ad

Question about Janome Sewing Machines

1 Answer

...stuck Handwheel keeps getting stuck and unable to turn toward me, unless a lot of force is being used, and machine is able to run when stepping on peddle. What could be causing the handwheel to be ...

Ad

Question about Husqvarna Sewing Machines

1 Answer

...just need to take two screw drivers, one on each side, and gently pry the handwheel off. Nothing else is keeping it attached. Many of these are just stuck a bit and need gentle prying. Good luck. ...

Ad

Question about Janome Sewing Machines

1 Answer

...handwheel is stuck after I removed a piece of fabric that was stuck by the knife. if the handwheel won't turn, i'd double check nothing is still stuck. also, make sure you didn't half disengage the ...

handwheel is now stuck, after I wound the bobbin thread. Why is it not moving, after I changed the handwheel to engage with the needle? Take it back. New Singers are known for having problems. Upgrade

Question about Kenmore Sewing Machines

1 Answer

Handwheel is stuck I got a Kenmore Mini Ultra for Christmas last year, this is the first time I'm using it. It started sewing fine then it froze, the handwheel won't turn, I took out the bobber and ...

Question about Necchi Sewing Machines

1 Answer

Handwheel Stuck The handwheel on my Necchi 4825 sewing machine will not turn. There is no thread jam in the bobbin area. How about the belt? you have to take off the outer case, usually a few screws ...

Question about Singer Sewing Machines

1 Answer

...handwheel stuck. Just hums First, remove the bobbon, hook and anything in the lower part of the machine. try to turn the handwheel. Do not force it. If this does not free it up, take it to a ...

Question about Juki Sewing Machines

1 Answer

...stuck in the feeder, but was very easy to remove). I couldn't see any obvious tangles, but the handwheel wouldn't turn, and when I pressed on the foot-peddle, there was noise from the motor but no ...

...handwheel on my activa 130 has jammed. It happened after the machine got stuck on a thick obstacle of fabric. In order to release the fabric I had to detach the needle and presser foot. ( I Suspect ...

...stuck and didn't come up when the handwheel was turned counter clockwise. I can't take out material sown as the needle is stuck. I would take it to the Sewing Shop. You've probably damaged whatever ...

Not finding what you are looking for?
Euro-Pro Shark 80 - 7133 Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...