Euro-Pro Shark 80 - 7133 "jaws" Questions

Ad

...machine in a few years ?? the bottom feet are not moving fabric??? Remove the plate & give the jaws a little drizzle amount of oil & let that seep in then gently hand crank the machine until ...

Ad

I put a 1 foot pipe into the throat to thread and I clamp the pipe and the jaws won't hold the pipe tight enough to thread if you are using a jaw vice for this , you are using the wrong bit of ...

Ad

When I put a shorter pipe in to cut and thread the jaws won't keep the pipe tight. I am talking a 1 foot pipe May require a nipple chuck from rigid. designed to hold short pieces of pipe. Consult ...

Question about Sewing Machines

1 Answer

...1. Get a Vernier caliper. Preferably both in inches and in millimeters.2. Use the small inside jaws to measure the inside of the hexagonal screw keyhole, perpendicular to two of the sides.3.

...or do you have to do it machines feed automatically the bottom feed is by a set of jaws that rise up and move back then down and repeat the process back or forward according too the ...

Question about Elna Sewing Machines

1 Answer

...have you checked the spindle behind the bobbin is clogged with cotton thread? Plus check the jaws that move the material under the plate for fabric/cotton/fluff deposits as this can have an ...

Question about Juki Sewing Machines

2 Answers

...more. Seamed to work and then WALLA out again. 2nd you know thos type of paper clips that are like jaws but if you flip their little handles over they will lay against your paper??? I got a tiny one ...

Not finding what you are looking for?
Euro-Pro Shark 80 - 7133 Logo

125 questions posted

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...