Maytag Performa PAV2200 "level washer" Questions

Ad

Question about Washing Machines

2 Answers

washer is level. Tight the locknuts tight against the washer cabinet to prevent washer's vibration. Good luck! Even after leveling my Frigidaire washer on a pedestal, the washer shook the house during

Ad

...washer to level ground or by adding some stuff like card board etv to level the washer . If issue still persists even if its already levelled there may b an imbalace in your spinning wheel inside the ...

Ad

Question about General Washing Machines

1 Answer

...level. If the washer is not level, replace the block and continue adjusting the feet until the air bubble is centered in the level. Crouch down on the floor near the front of the washer and use a 14 ...

Question about Maytag Washing Machines

1 Answer

level the washer. Level the feet on the pedestal AFTER the washer is installed. Just make sure the legs of the washer are all set the same on the pedestal and tightened down. Then, adjust the pedestal

Question about Washing Machines

1 Answer

...level your washer, used washer legs for adjustments, after leveling of washer, place both hands on machine, and try to rock side to side, front to back,there should be no play (movements) on washer, ...

Question about Kenmore Washing Machines

1 Answer

...I recommend making sure the washer is level as some washers need to be on a level surface. If it is not level use boards or get shims from your local hardware store or home depot to level it

Question about Kenmore Washing Machines

1 Answer

...washer is level front-to-back and side-to-side. Use a level across the top of the washer cabinet (NOT the lid! The lid on most washers is slightly bowed.) to check. If you have any questions, please ...

Question about Hoover Washing Machines

1 Answer

...level on top of the washer; make sure it is in the center. Take a look at the level and see where the bubble is in the water level? Accordingly you have to lower or raise either 4 corners of the ...

Question about Kenmore Washing Machines

1 Answer

...level a washer tub first get a level. second, some have self leveling rear legs, just lean the machine forward and set down slowly. the rear legs are now level. if you dont have self leveling rear ...

Question about Washing Machines

1 Answer

...level placed on the washer, look to see where the bubble is? If it is in the centre then your washer is levelled, indicating that something is loose in the washer, but 9 out of 10 the washer is not ...

Not finding what you are looking for?
Washing Machines Logo

655 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...