Kenmore 46462 Front Load Washer "drum wobble" Questions

Ad

...drum wobble with larger loads on model 110-22922-100 I have a Kenmore model 110-22922-100.  Suddenly during a spin cycle it started making major noise.  When I opened the lid the drum ...

Ad

Question about Maytag Washing Machines

1 Answer

drum wobbles too much drum makes a loud noise and wobbles way too much and gets stuck to one side and then stops. sounds like you have got either a collapsed suspension leg or your bearings gone

Ad

...are level so is problem inside? Check the suspending springs inside. These are attached to to the drum jacket. If the springs are OK check whether the drum is wobbling. Turn by hand and check.

...wobble. If just the stainless inner tub is the one that wobbles, that suggests a bad rear drum bearing. The counter weight problem easy to fix once you get the top and back off and just need ...

Question about Admiral Washing Machines

1 Answer

my washer wobbles a lot. I tried to wash a comforter in it and after that it wobbles and the drum is very loose now what might be wrong If really bad sounds like drum bearings worn to ...

Question about Whirlpool Washing Machines

1 Answer

...front of the tub has a wobble in it. almost like it has come loose. can this be fixed? Could be loose bolt @ back of pulley or Drum bearing gone which makes drum very noisy on spin expensive to

Question about Washing Machines

1 Answer

...what's wrong? Does the drum wobble quite a bit or does it look normal? If it's wobbling it could be the drum casing knocking the internal structure. Might need a new drum spring if this is the ...

Question about GE Washing Machines

1 Answer

washing machine drum is very wobbly washing machine (top Loader) is a little over 1 year old. Drum is now very wobbly especially during spin cycle, makes alot of noise when spinning. * General tips * ...

Question about Bosch Washing Machines

1 Answer

How to stop drum wobbling How do i get the drum to stop wobbling? I'm worried it will tear the rubber seal on the front. I replaced the 2 shocks and now it doesn't bounce or stop spinning during ...

Question about Kenmore Washing Machines

1 Answer

My plastic drum seal on my Whirlpool duet front-loading washer is chipping apart. The drum doesn't run true, is wobbly and has a rhythmic rub when turning. How do I replace the drum seal? Model ...

Not finding what you are looking for?
Kenmore 46462 Front Load Washer Logo

361 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

James Hensley
James Hensley

Level 2 Expert

161 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...