Kenmore 46462 Front Load Washer "he2 add garment light" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...add garment lights My HE2 Plus will fill with water, but when the tub reaches 1/2 full, it drains, and the pre wash/add garment lights keep blinking. When the tub is drained, the door unlocks and the ...

Ad

...making a clicking sound, the tub isnt draining, and the add a garment stays on Door switch isn't making. .if door isn't closed the washer won't run and will have the add garment light will stay

Ad

Question about Kenmore Washing Machines

1 Answer

...add a garment light will come on, the tub will do a half spin and the door lock will come on while the add a garment light is still on. In addition to the pump problem is the door latch also damaged? ...

Question about Kenmore Washing Machines

2 Answers

...HE2 Washer Model 11046462501 Selector dial lights blink continuous with status lights Add a Garment, Rinse, Clothes Clean lights lit. What does this error mean ? This IS the code for drain problem, ...

...add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. ...

Question about Kenmore Washing Machines

1 Answer

...add garment' light and the 'door locked' light are on at the same time indicating the machine is experiencing two operating modes at once thus not allowing the machine to operate. I can get the door ...

Question about Kenmore Washing Machines

1 Answer

HE2 110.46462501 stopped in the cycle with some of the status lights lit, lights around the cycle ring flashing. Restart on 'drain and spin" cycle, pump runs for a period then tops with Status lights

Question about Kenmore Washing Machines

1 Answer

off balance then shut itself off now it wont start the light for add garment stays lit how do you reset. Check the owner's manual for the reset switch. You can always Google your unit for support, too

Question about Kenmore Washing Machines

3 Answers

...He2 plus, or HE2T,,, The lights give the error code to be certain... Also tech sheet behind front bottom panel will help identify error code and how to diagnose exact problem. I would recommend ...

Question about Kenmore Washing Machines

1 Answer

...HE2 washing machine. Was not pumping all the water out. Followed instructions to pull panel and get to the pump filter. Emptied the pump filer and replaced. Replaced the panel. Now, when starting the ...

Not finding what you are looking for?
Kenmore 46462 Front Load Washer Logo

361 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...