...burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that type smell. You can avoid stretching and having to replace ...
vacuum. Thanks. Burning rubber smell means the brush belt need attention. Make sure the brush is turning freely and replace the belt Eureka 4481 very loud. Already replaced belt. Any suggestions as to
...smell when I start vacuum Burning smell from a vacuum usually comes from the belt....check for any objects caught between the belt and the brush roll. Is the surface selector at the correct
...but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn out ...
...smell I have an Eureka Capture Vacuum and it starts to give off a burning smell after a minute of use. I cleaned the brush, and the belt seems fine, but the smell still persists. Any advice?
Burning rubber smell when the vacuum is on. I have a Kirby the Ulitimate G vacuum. It works fine but it gives burning rubber smell. Can anyone tell me what's wrong with it. I tried to open it but none
Vacuum smells like something is burning. When I sweep, the Rainbow smells really bad like something is burning inside of it but I don't know how to dismantle it to see what is going on. Any help would
Question about Eureka Vacuums
its a burning smell when i turn my valcumn cleaner on its a burning smell when i turn it on The belt is probably worn. Here is the replacement belt you need: Eureka Altima Belts
...burning rubber when running Vacuum belts lose elasticity and will slip. It may spin the brush roll ok when you look at it but be so loose that when. Vacuuming carpets the belt will stop turning. The ...
73 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: