keeps melting and breaks. what do i need to do? everything else is working, the little piece of metal that hooks on the belt gets too hot and melt the belt i think your talking about the motor spindel
keeps breaking. When feel belt driver rod it is superheated.....could it be melting into the stretched belt causing it to weaken? Hello, I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before
...keeps melting every belt we put on whenever we put a new belt on our dirt devil dynamite within 2 minuets it is melted what could be the problem usually that means something is stopping the brushes ...
Question about Bissell Vacuums
...Belt and pump keep melting I just replaced the belt and cog belt on my cleaner and as soon as I put everything back together again and started it up, the brushes would not spin, the belt melted and ...
Question about Eureka Vacuums
...keeps slipping off of drive spindle. The belt drive spindle and the brush roller are not in alignment correctly as there was a burning smell off and on for a few uses. Then the belt slipped off ...
belt keeps slipping off. I bought a new one and it too slips off after about a half hour of vacuuming. check the motor shaft for loosness. when the bearings wear out and fail, the motor shaft will not
...keeps snapping I have a Bissel Cleanview II. I go under the vacuum to replace the belt. I can remove the brush and get the new belt on. But it looks as the metal drive spindle on the motor just melts ...
vacuum and really don't want to abandon it for a new one. When I changed the belt after it broke, the new one broke almost immediately. I put it off to a fluke and installed the 2nd belt (2 in a pack)
Question about Dyson Vacuums
...vacuum properly and turns easily. Your problem could be the clutch unit what has probably happened is either the clutch plates are warn, or the 3 balls in the clutch have warn a large grove in there ...
73 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: