...turn the TV back on. 8. With television on, press and hold down MUTE and SELECT again until the small light blinks twice (same as in step 3). 9. Entercode 960. 10. Slide switch back over to "DTV". ...
Question about Televison & Video
...only go to standby (red light) when switched on. Cant find a way to turn it on. Have held in button as suggested but it doesnt turn it on. Tips to repair your remote control.Click on: remote ...
turn on. we have unplugged it and the light continues to blink. We plug it back in and the light blinks, but it won't come on again. Try pressing and holding the remotes "Power on" switch as it may be
Question about Mitsubishi Televison & Video
...light stays on when trying to turn off tv. picture go's off when cable remote is used but green light stays onand you can see that screen is still on? You need to set up the cable box remote for your ...
Power light is on steady, but cannot turn on at switch or with remote power ligth is on steady,but cannot turn on at switch or wite remote
Question about LG Televison & Video
...turn on where the red standby light goes out, then within seconds the tv will turn off automatically, and red lights show on standby again. have tried manually, by using switch on tv same senario, ...
...light is not showing will not turn on using remote control when tv is on standby you can use buttons on side of tv to turn on are batteries in right way to test remote if you have camera on phone ...
...turn the red light on the bottom of the tv off Try power-cycling your TV (e.g. turn it off and unplug it for several minutes). If the TV then powers on, reset to factory defaults. If the problem ...
Question about RCA Televison & Video
turn on my RCA flat screen TV without a remote? I put new batteries in the remote but even the light in the front of the remote does not light. There might be a power switch on the front panel. if the
324 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: