2006 Chevrolet Chevrolet Impala LT "v6 stretch bolts" Questions

Ad

...v6. 4x4.. taking heads off. need a little help.. can i use the same bolts. how much does it cost to take heads to machine shop.. The head bolts stretch when used, so you are not supposed to re-use ...

Ad

...v6 Depends on whether the Thunderbird engine is a V-6. it is a 4.0 V-6.and what year. Take your head gasket off the Explorer engine and place it on the head off of the thunderbird head, if all the ...

Ad

...V6. Can I re-torque rear caliper bolts to 26 ft. lbs.? I torqued rear caliper bolts to 40 ft. lbs., per someone's instructions. I found out later that, they're supposed to be 26 ft. lbs.!? Can I ...

Question about Chevrolet

2 Answers

stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed in order to obtain proper torque. 3.1 liter V6 Torque sequence--> ' 6 2 3 7 ' ' 5

...v6 heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps, 12 point bolts step 1- 40 ft lbs step 2- additional 90 degrees recessed bolt 13 ftlbs For ...

Question about Chevrolet

1 Answer

...v6 dohc its a 1994 model The torque is 90 foot lbs, and they want you to use new bolts, the old ones are stretched and CAN NOT be reused, tighten 20 lbs at a time in proper sequence as outlined in ...

...V6 3.8 eng. Install the cylinder head gasket. Ensure the arrows point towards the front of the engine. The left cylinder head gasket has the letter L stamped next to the arrow. NoticeThis bolt is ...

Question about Chevrolet

1 Answer

...stretch over the driven (accessory) pulley. If removed, install the other belts in the same way. Adjust the belts to the proper tension. Tighten the adjusting and mounting bolts. Models equipped with ...

Question about Chevrolet

2 Answers

stretch during initial installation. New head bolts must be used when cylinder head is replaced or re installed to obtain proper torque specification Class action lawsuits are also involved in these 2

how to tighten a serpentine belt on 2000 chrysler cirrus V6 2.5 engine. everytime i tighten the bolt on the idler pully it tightens crooked. Try this, adjust the belt tension so that the belt is ...

Not finding what you are looking for?
2006 Chevrolet Chevrolet Impala LT Logo

28 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...