KitchenAid Artisan Series Tilt-Head Stand Mixer "mixer noise problems" Questions

Ad

Question about Hobart Food Mixers

1 Answer

...mixer and narrow down the location of the noise. Like I said, I expect the noise to be the motor. In particular the front motor bearing. I can help you futher if you narrow down the location of the ...

Ad

Question about KitchenAid Food Mixers

1 Answer

...mixer began to make a rattle noise - still turns but noise is not right. Also a little grease always dripped in mixing bowl ever since I first bought it new. it is hard to tell you exactly what it ...

Ad

Question about KitchenAid Food Mixers

2 Answers

...mixer making a grinding noise Hi - I have the Kitchen Aid Ultra Power 300 stand mixer. While making batter for banana bread this morning it started making an awful grinding sound. The mixer still ...

Question about KitchenAid Food Mixers

1 Answer

...noise. The mixer still turns, but makes a horribly loud grinding noise. Any thoughts? If it's metallic sound you are loosing teeth on a gear or two. This is caused by lack of lubricant or simply ...

...noise? Not running at all? Christina, can you give more information of the problem? Is your mixer turning on at all now? Making clicking or grinding noises? Do you need to replace broken or dented ...

...mixer and then turn it on it makes a loud clicking noise. We thought it was the mixing attachment hitting the bottom or the bowl but it makes the same noise with or without the mixing blade attached. ...

Question about KitchenAid Food Mixers

1 Answer

...mixer started making a grinding noise and beater bar keeps stopping. When I put it gently with my finger, it begins turning, only to stop again and make that grinding noise. It is only about 3 years ...

Question about KitchenAid Food Mixers

1 Answer

...mixer (k5ss lift bowl?) smells as soon as I start using it. It makes an intermittent noise at lower speeds, best described as a groan or low pitch squeal. There is no noise at higher speeds. What ...

Question about KitchenAid Food Mixers

1 Answer

...noise from the cooling fan or the winding of the motor itself rubbing on the mixer housing. Part number for the braket and bearing is 3180526. both are relatively cheap and easy to replace. If you ...

...noise. If your mixer is new enough that it took the 60 tooth gear, then take the mixer apart, clean and remove all gears, clean them off with wd-40 and inspect closely, even the smallest chip can ...

Not finding what you are looking for?
KitchenAid Artisan Series Tilt-Head Stand Mixer Logo

41 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

162 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...