2003 Mitsubishi Lancer "headlight connector" Questions

Ad

Question about Mitsubishi Lancer

1 Answer

...headlight connector. How: buy a replacement headlight connector at your favorite auto parts store, cut off the old connector, then (a) solder and heat-shrink or (b) wire nut and E-tape, or (c) crimp ...

Ad

Question about Mitsubishi Lancer

1 Answer

...headlight connector is not receiving +12v at the connector when you turn the headlight switch on, check the fuse, the switch, and the relay. If the headlight assembly is receiving +12v at the ...

Ad

Question about Mitsubishi Lancer

1 Answer

headlight wiring diagrams I need to see If I can replace connector wire You can buy the replacement pigtail connector at the auto parts store the connector plugs on the back of the bulb inside the ...

Question about Cars & Trucks

1 Answer

...headlight switch connector is the first place I would look at when .... If I ever find a good trustworthy source for male headlight plugs, I might try making some..... Comparing The 3 High-Paying ...

Question about Mitsubishi Lancer

1 Answer

...and pull it out of the housing assembly. 3. Inserta new headlight into the housing and rotate the headlight clockwise to secureit to the housing. 4. Plugthe power connector back into the

Question about Mitsubishi Lancer

1 Answer

any ideals? pull the headlight switch out and check for a burnt connector, if the connector is heat damaged replace it and the headlight switch, the repair connectors are avail from your local dealer

...headlight connector and switch must be done as one repair or the new headlight switch will quickly stop working again due to a poor connection of the connector. When the connector is replaced it must ...

...If problems are found replace the headlight switch and the connector. The repair  connector is available from local suppliers the headlight switch is also, both are fairly cheap parts to

My headlights stopped working on a 1991 oldsmobile ninety-eight. What should I do? Unplug headlight connectors. With switch on, test for voltage going to connectors. If there's voltage then headlights

Question about Mitsubishi Lancer

1 Answer

...headlight assembly, unplug the wire connector turn the bulb 1/3 - 1/4 turn counterclockwise and remove. when reinstalling DO NOT TOUCH THE GLASS (it is a halogen bulb) of the bulb when installing, ...

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

945 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...