1999 Chevrolet Tahoe "cylinder head" Questions

Ad

Question about Chevrolet Tahoe

1 Answer

...Cylinder Head M8 Bolts - in Sequence 30 N·m 22 lb ft Cylinder Head M11 Bolts - First Pass in Sequence 30 N·m 22 lb ft Cylinder Head M11 Bolts - Second Pass in Sequence 90 degrees Cylinder ...

Ad

Question about Chevrolet Tahoe

3 Answers

...CYLINDER HEAD! DONT DRIVE THAT TOO FAR OR ELSE YOU'LL DESTROY THE ENGINE! GET THAT ONE FIXED ASAP IF YOU PLAN ON KEEPING IT. You have a broken head gasket. Ouch- This is normally caused by a failed ...

Ad

...cylinder head. If you have white smoke from the tailpipe that's a dead giveaway that a head gasket has failed. Any time you remove the cylinder heads have them checked for cracks. The castings used ...

...a complete visible inspection of ALL GASKETS will be required as well as CYLINDER HEAD AND BLOCK for cracks. After repairs are completed don't forget to change the oil and filter again. Hope this ...

...cylinder leak down test befor further tear down. If the head gasket is gone then you will discharge water into the engine bores that goes into the sump and mixes with the oil It is stirred up by the ...

cylinder head is cracked would be more rare than a leaking head gasket both of which could possibly be tested by a leakdown test of individual cylinders. The water has to come from somewhere. Does the

Question about Chevrolet Tahoe

1 Answer

...gaskets now i am losing water through the exhaust and water is not mixing with oil You have either a cracked head at water port to cylinder or one of the gaskets did not seal properly when

cylinder head torque specifications go to autozone.com. register your vehicle with them. Look up head gasket on their replacement parts line. They will give you the sequence and specs for Free and you

...cylinder head is cracked, or warped, and as they start disassembling, they have discover it was the intake manifold gasket that has failed. It's up to the honesty of the repair shop to tell the ...

Question about Chevrolet Tahoe

1 Answer

...cylinder head gaskets. Most times this can be isolated by doing a compression or cylinder leakdown test. Otherwise, the intake needs to come off before removing heads....Carefully inspect the intake ...

Not finding what you are looking for?
1999 Chevrolet Tahoe Logo

1,419 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...