2004 Chevrolet Impala "gm intake bolt sequence" Questions

Ad

...GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence. Right side exhaust manifold. Torque the ...

Ad

Question about Chevrolet Impala

1 Answer

gm 3.8l head bolt torque NEED INTAKE AND HEAD BOLTS TORQUE AND SEQUENCE John, Frank, and the rest of these idiots like them are the reason why the Internet can be cancerous as the plague of Democratic

Ad

Question about Chevrolet Impala

2 Answers

...GM 12486572) intake and vortec heads. What is correct torque for intake manifold bolts? 25 ft/lbs The correct procedure is as follows. Step 1- Torque bolts to 71 inch pounds. Step 2- Torque bolts to ...

Question about Cars & Trucks

1 Answer

...GM bolts should be torqued in sequence to 22ft lb then another pass 90 degrees and a third pass 90 on the long, 50 on the short. The 8mm bolts near the intake are torqued to 22ft lb. make sure all ...

...GM 1052080). Torque the bolts in the proper sequence (1-8) to 37 ft. lbs. (50 Nm). Using a torque angle meter turn the bolts 90 degrees in the proper sequence. Right side exhaust manifold. Torque the ...

...intake torque sequence for a gm 3100 v6 engine on a buick skylark custom? I need the intake torque sequence I'm an old timer.Just run all the bolts down to snug,start from center and go in an outward ...

Question about Chevrolet Impala

2 Answers

...intake manifold gaskets. NOTE: Apply sealer GM P/N 12346286 (Canadian P/N 10953472) or equivalent to the ends of the intake manifold seals. Lower intake manifold seals. Lower intake manifold. Lower ...

...GM 383 stroker Replc'd head/intake gask.Still have 1lb coolant pres.drop after 1hr. Friend suggested GM coolant seal additive.Suggestions? What kind additive. New eng small amt oil in pan @ 3hrs. Hey ...

Question about Chevrolet Impala

2 Answers

...GM P/N 12346004 or equivalent) to cylinder head bolt threads. Install the cylinder head bolts. Tighten the cylinder head bolts in sequence on the first pass. Torque to: 22 ft. lbs. (30 Nm) Using a ...

Question about Chevrolet Impala

1 Answer

...GM P/N 12345382 or equivalent to the threads of the lower intake manifold bolts. Install the lower intake manifold bolts. Notice: Proper lower intake manifold fastener tightening sequence and torque ...

Not finding what you are looking for?
2004 Chevrolet Impala Logo

2,755 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...