1997 Geo Metro "engine idle" Questions

Ad

...idle and engine hesitation, it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and ...

Ad

...idle screw? :) hi sounds like your engine is surging due to incorrect mixture now your idle screw is on the thottle cable were it connects to the carb and the mixture screw is on the carb body as an ...

Ad

...idle down to 800 HOT? (engine temp)>? Aka: Geo Metro (later re-branded the Chevrolet Metro), Pontiac Firefly, and Suzuki Swift which engine, what country??? I will post for USA only !!!! Auto or ...

Question about Geo Metro

1 Answer

...it with dish soap and water. then spray your engine and vacuum lines down. when you hear the slurp and feel the idle go down trace your bubbles to the suction point. aaaaHH i love cars :) good ...

Question about Geo Metro

1 Answer

...time hot, not you unless you step on the throttle. only IT does. the ECU. if the idle is wrong when cold engine, that is the IAC failing. or is normal, I dont know you never stated hot cold or and ...

Question about Geo Metro

1 Answer

idle the engine idles fast, the colder the outside temp, the faster it idles. I have no fault lights, it is a 93 throttle body fuel injection. The is a small canister on the intake manifold, about 1.5

Engine starts and idles at fast idle. It will not rev up no matter where the throttle is. If you keep it at full throttle it will eventually rev to full throttle and you can increase/decrease rpm's as

Question about Geo Metro

1 Answer

idling problem i have geo metro 1996 idling problem high and low every seconds How many miles do you have on the engine? Is it a 1.3 L ?

Question about Geo Metro

1 Answer

...engine idle, or the door light. The light stays on because the door switch needs adjustment or replaced or perhaps it has beenturned on by the light interior light switch that controls the dash board ...

Question about Geo Metro

2 Answers

...engine idle. An important note: code 46 is often caused by misadjusted distributor timing. As you probably know, timing affects the idle, and if improper timing moves the idle beyond the ISC's ...

Not finding what you are looking for?
1997 Geo Metro Logo

324 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Geo Metro
1995 Geo Metro

215 Questions

1994 Geo Metro
1994 Geo Metro

193 Questions

1993 Geo Metro
1993 Geo Metro

168 Questions

1996 Geo Metro
1996 Geo Metro

168 Questions

1992 Geo Metro
1992 Geo Metro

151 Questions

Top Geo Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...