...a finger in contact with compressor housing. LG approx. three years old. hi have you cleaned the matrix best done by blowing with air but a soft brush can work,make sure that all the cooling vanes ...
Question about Hotpoint Refrigerators
...cleared the ice behind the panel in the freezer. Then ran the freezer and it appears that freezer matrix is getting cold, but I have not heard or seen the fan operate in the last few days since
...interlock in ice maker which doesn't appear on schematic ? if the water is stored in a container matrix in the fridge (to cool it down b4 dispensing) it may have frozen up. best give the unit a ...
Question about Refrigerators
...still the same. When I switch it off , I can hear a click. Could the fault be in a relay. Also the matrix at the back is getting hotter on one side and the compressor is getting really hot. Could it ...
...the same issue with this one. It appears to be caused by the design/positioning of the cooler matrix which reduces the life of the compressor. Will never touch Zanussi again. Elecrtolux ...
...plus the re-gas will probably be as much as a new unit Old saying "never poke a refrigerator matrix with anything sharper than your elbow" , sorry ! what you did sounds like you bursted a
...on top of the compressor. Removed the air ducting inside the freezer part and found the cooling matrix was half blocked with solid ice. Warmed and cleared all that and guessed that the solid ice ...
6 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: