2003 Yamaha YZ 125 "clutch bite" Questions

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...clutch at that point. Remove the cover screws (count the turns) and start pulling disks and metal plates out of the hub--keep track of the order of removal. You need to replace only the cork faced ...

Ad

...clutch plates and friction plates housed,, undo the 7 or 8 spring loaded bolts carefully take the first fibre plate out then metal friction plate then another fibre plate and so on,, wen u take the ...

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...clutch that has more ability to feather in slow turns etc. So I don't want to MOVE the biting position, I want a longer bite, so to speak. Any ideas? or is this the way these bikes are? 12000 miles. ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

Biting point on clutch lever is right at the end Is there any way to adjust clutch leaver on hydraulic clutch as my biting point seem right at the top end as u release the leaver find your master cyl.

Question about Yamaha YZ 125 Motorcycles

1 Answer

clutch bite point has moved so its almost back to the handlebar. Any idea of what I have done! Thanks Steve I will agree with Brock,system just needs bled to actuate clutch properly.Use the means that

...bite point of the clutch has moved from mid travel on the handle to almost the end of the travel There must be an adjustment to change the bite point. There is she'll on the handle bar and a ...

Question about Yamaha YZ 125 Motorcycles

2 Answers

Clutch problems Suzuki RM125 I have a Suzuki RM125 2000 model and have a problem with the clutch. When I pull clutch out to biting point I have to give loads of high revs in order for it to go. Can't ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

Clutch bite is too far away from handlebar The biting point on my clutch cannot be felt until the lever is around three quarters of the way out. I have tried other bikes and found that it is alot ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

clutch lever out slowly do you feel it begin to bite. If not readjust the cable as per the user manual then try again. If you can feel the bite when pushing try again with the engine running. If still

Question about Yamaha YZ 125 Motorcycles

1 Answer

Clutch bite very late adjust the cable shorter. On the side that goes into the engine there should be a adjustment screw. If that doesn't work because it is already at its shortest length then you ...

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

694 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Paul Ellermets

Level 1 Expert

6 Answers

Neil Lancaster
Neil Lancaster

Level 1 Expert

14 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...