2003 Yamaha YZ 125 "clutch lever" Questions

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...clutch lever assembly (where the cable attaches to the gearbox) has gotten out of position on the Axle push lever (the shaft that goes into the side cover and the lever is attached to). The shaft is ...

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...lever assembly and the clutch cable make a 90 degree angle. There should be a casting index on the case as well to show exactly where the push lever should be located. Just remember that when the ...

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...or you have the clutch misaligned. You can check for proper operation with the bike off, and the clutch cover off while pulling the clutch lever. Should be able to see it move 1/4-3/8 of an

Question about Yamaha YZ 125 Motorcycles

1 Answer

clutch lever please help me Be sure the clutch lever is adjusted for 1/8" to1/4" free play at the outside end of the lever. If the oil is extremely dirty, the grit can cause the clutch to drag. Change

Question about Yamaha YZ 125 Motorcycles

1 Answer

...Clutch perch and lever, cable, arm the cable connects to inside the flywheel cover, the push rod, the pressure plate. I checked to make sure all the parts are there and they are, the 11/32 ball, ...

Question about Yamaha YZ 125 Motorcycles

2 Answers

...clutch lever has tention as it should , ive been told to see if the arm pulls the presure plate and it does the problem seemed to come from no where. i was out on it one day, parked it upand left it ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...clutch lever is pulled in. The push lever axle (I think this is what you are calling the main shaft) sits in a hole on the side cover. The gear on the axle engages the push rod and the push rod ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...clutch i pull in mt lever and i cant push the bike. it wants to go with the clutch engaged. the cable is pulling the clutch you can see it on the casing and its being pulled has far has it can be try ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...am not it stalls The clutch is dragging, you have to adjust the clutch cable so the clutch is not engaging when you pull the lever. Could also be a bad clutch spring but I would adust the cable

Question about Yamaha YZ 125 Motorcycles

1 Answer

...and put the bike in gear, rev the engine a little and let the clutch lever out SLOWLY and see if the engine stalls when the lever is fuly out. If it doesn't stall then your clutch needs

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

694 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Paul Ellermets

Level 1 Expert

6 Answers

Neil Lancaster
Neil Lancaster

Level 1 Expert

14 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...