2003 Yamaha YZ 125 "putting back seats down" Questions

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...putting the slide back in the throat of the carb, move the clip on the jet needle one notch lower.Put the rest of the carb back together, clean the air filter and install the carb. Let the float bowl ...

Ad

Question about Yamaha YZ 125 Motorcycles

1 Answer

...back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest ...

Ad

Question about Yamaha YZ 125 Motorcycles

2 Answers

...back in the same hole they came out of. IMPORTANT > do not tighten these two adjusters down. Only screw these in until they LIGHTLY seat. Now turn each adjuster one and one half turns outward. Put ...

Question about Yamaha YZ 125 Motorcycles

2 Answers

...back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest ...

...still a problem, then remove the slide from the throat of the carb and move the clip on the jet needle down one notch. This process should get you back on the road. Please rate this solution.

Question about Yamaha YZ 125 Motorcycles

1 Answer

...back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...down one notch. Put the rest of the carb back together, clean the air filter and install the carb. Let the float bowl fill then start the engine. This process should get you back on the road. Please ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...a staples in 2 3 there start ontoward 4 the front of the seatpulling the cover tight as you staple it down. after you have the front down work the same way to the back. Good luck Mark C.C. ...

Question about Yamaha YZ 125 Motorcycles

1 Answer

...back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I ...

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

694 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Israel Pineiro Jr

Level 2 Expert

165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...