20 Most Recent Windsor SR12 Sensor Bagged Upright Vacuum - Page 5 Questions & Answers


Not working at all = no noise, no lights?

Do you know that it is getting power? Use a non-contact AC indicator (seriously, every home should have one. Example https://www.amazon.com/AimoTek-AVD05-Non-contact-Detector-12-1000V/dp/B01LI520UI)
to see if there is power at the hose end and at the powerhead if possible.

There are many different 600 series models, here is the manual for one random sample https://www.kenmore.com/products/kenmore-125-81614-600-series-bagged-canister-vacuum-w-pet-powermate-purple/

Vacuums | Answered 18 hours ago


not here and we have no idea where

Vacuums | Answered on Nov 11, 2019


This is a vacuum cleaner?
Make sure you are fitting it to the correct hose end
Clean the inside and outside of the mating surfaces.
Cant say much more without the make and model.

Vacuums | Answered on Nov 10, 2019


A good (and simple) explanation is here

https://en.m.wikipedia.org/wiki/Spin_(physics)

Click under "Magnetic Moments).

Vacuums | Answered on Nov 07, 2019


How old is it? Batteries have a finite lifespan, so it may be just that it needs a new battery.

Otherwise, there may be a short or something internally that is draining the battery down.

Vacuums | Answered on Nov 05, 2019


I have the instructions that came with the Silicon Scientific Atomic Projection Clock and was going to attach them as a PDF but it doesn't look like it's allowed here. If anyone know how to do that let me know.

Vacuums | Answered on Nov 04, 2019


From a couple of different slow cooker manuals - most I looked at are the same:

When in the AUTO setting, the slow cooker will begin cooking on HIGH and then will shift to LOW after approximately 2 hours of cooking time. AUTO setting does not turn off the unit. Other favorite recipes may be adapted to the slow cooker. All times listed in the following chart are approximate and should serve only as cooking guidelines.

Regular Cooking Slow Cooker Cooking Times

1 (Low) 2 (High) AUTO

30 minutes 6-8 hrs. 3-4 hrs. 5-7 hrs.

35-60 minutes 8-10 hrs. 5-6 hrs. 6-8 hrs.
1-3 hours 10-12 hrs. 7-8 hrs. 8-10 hrs.

Vacuums | Answered on Nov 04, 2019


Check for clogs in the turbo head, wand and hose.

Vacuums | Answered on Nov 04, 2019


EITHER THE BELT IS BROKEN OR THE BEARINGS IN THE BEATER BAR ARE STUCK WITH JUNK

Vacuums | Answered on Nov 03, 2019


Contact the seller you purchased it from, or the manufacturer.

Vacuums | Answered on Nov 02, 2019


CALL A REPAIR SERVICE

Vacuums | Answered on Nov 02, 2019


Is something wound up in the rotating brush bar ?

Vacuums | Answered on Oct 31, 2019

Not finding what you are looking for?
Windsor SR12 Sensor Bagged Upright Vacuum Logo

86 questions posted

Ask a Question

Usually answered in minutes!

Top Windsor Vacuums Experts

Mike

Level 3 Expert

4363 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Raymond Richards
Raymond Richards

Level 3 Expert

407 Answers

Are you a Windsor Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Windsor Vacuums

  • Windsor Vacuums

Most Popular Question

windsor sensor vacuum lights flashing

  • Vacuums
Loading...