20 Most Recent Inline 40 amp. In-Line Circuit Breaker Questions & Answers


The breaker goes in in series.

So, that means (for example) you remove the hot wire to the unit, from the positive battery power source, and hook this wire to one side of the breaker, then connect the other terminal to the positive battery power source.

This will stop current flow if anything over 40 amps happens on the line.

You actually can hook the breaker anywere along the circuit, but the closer to the power source, the better you are protected.

Inline 40 amp.... | Answered on Mar 02, 2011


Do you mean light switches?
https://www.familyhandyman.com/electrical/wiring-switches/how-to-wire-a-threeway-switch/

http://www.electrical101.com/3way-switch-wiring-using-nm-cable.html

If you mean something other than house lighting switch, please Comment with more details

Electrical... | Answered 11 hours ago


You should turn off the remote emergency switch. Then check the reasons, but this is based on that you can not turn off the switch.
Electromagnetic valve for generator set shutdown is out of control.
Speed regulator of diesel engine has fault.
Operational errors may be that the control panel first breaks the key switch and then presses the stop button.
There are many reasons besides above reasons, you should check clearly and remove faults one by one, then will know what is the resaon.
We also supply Cummins diesel generator, if you need to have a new generator, please conatc us: sherly@dieselgeneratortech.com.

Electrical... | Answered Yesterday


Good question. What is the device?

Electrical... | Answered on Nov 17, 2019


Not 100% sure but I suspect the LED replacements exhibit a significantly higher impedance when off, unlike incandescent and halogen.

If you have multiple cans controlled by one switch, try changing all but one to LED and likely there will be no flicker at the lighted switch.

If you leave at least one halogen on the circuit and it still flickers, be sure to comment here and I'll research further.

Electrical... | Answered on Nov 17, 2019


Load it the light, fan, motor, etc that consumes power
http://waterheatertimer.org/Electrical-terminology.html
http://waterheatertimer.org/Safe-electric-wiring.html

Typically, 120 volt incoming hot line is connected to black, white to neutral, ground to green...
Then load has 2 wires + ground ... the white connects to neutral, black connects to load wire, and ground to ground

Electrical... | Answered on Nov 11, 2019


running lean possible dirty carb internals

Electrical... | Answered on Nov 06, 2019


I suggest you contact your supplier or local maintenance person.
If you plan to purchase diesel generator set in future, please contact sales@dieselgeneratortech.com

Electrical... | Answered on Nov 05, 2019


Hello, you can contact your supplier to get it.

Usually they have.

If you plan to purchase diesel generator set in future, please contact sales@dieselgeneratortech.com

Electrical... | Answered on Nov 05, 2019


Maybe the reason is that the excitation voltage is too low, so it can not reach 220V. You can try to adjust excitation voltage.
If you need to have new diesel generator set, please contact sales@dieselgeneratortech.com

Electrical... | Answered on Nov 05, 2019


CHECK RYOBI WEBSITE OR TECH SUPPORT

Electrical... | Answered on Nov 05, 2019

Not finding what you are looking for?
Inline 40 amp. In-Line Circuit Breaker Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Inline Electrical Supplies Experts

Gene Haynes

Level 3 Expert

5390 Answers

Brad Brown

Level 3 Expert

18110 Answers

john h

Level 3 Expert

22486 Answers

Are you an Inline Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Inline Electrical Supplies

  • Inline Electrical Supplies

Most Popular Question

am connecting 1000w

  • Electrical Supplies
Loading...