KitchenAid KFP760 12 Cups Food Processor - Answered Questions & Fixed issues

The best way to freeze zucchini is to blanch it first. This allows it to stay firm and green in your freezer bags, while locking in nutrients.

  • Wash your zucchini and remove tops and any bad spots.
  • Cut zucchini into slices or strips.
  • Bring a pot of water to a full boil. Add the zucchini to the water. Leave in for 1 minute only.
  • Quickly remove it, and plunge it into a bowl of ice water. This keeps it from becoming limp and will stop the blanching process.
  • Pat dry until no water remains on zucchini. Excess water causes freezer burn and frost inside your bags.
  • Store in freezer bags according to size you want, making sure that all air is pressed out of the bag before sealing.
  • Mark bags with date, and you are done.

KitchenAid... | Answered on Oct 16, 2014 | 761 views

If you want to chop first, add a little olive oil and salt before processing. Remember to draw out all the air in the container before freezing!
You can also slice and do the same (oil and salt)

KitchenAid... | Answered on Jul 13, 2014 | 627 views

Just do not blanch first, this makes it sticky when defrosted.
Cut into pieces, place in heavy-duty freezer bag and draw out the air before sealing the bag. To use, wait for defrosting before opening packet.

KitchenAid... | Answered on Nov 22, 2013 | 761 views

look for signs of wear on the drive coupling under the work bowl. it may need to be replaced.

KitchenAid... | Answered on Feb 13, 2011 | 348 views

To shred it into thin strips, use the blade with a series of holes in it. To slice, use the blade with a knife blade in it.

KitchenAid... | Answered on Sep 11, 2009 | 2,616 views

I have the 11 cup Kitchenaid food processor and did the same thing this weekend. It took a while but finally figured out how it went back together. Hopefully the pictures help. I know it's difficult to see since the pieces are all black. Good luck!



KitchenAid Food... | Answered on Jun 01, 2019 | 253 views

Store it with the lid upside down on top of the bowl

KitchenAid Food... | Answered on Apr 21, 2019 | 66 views

Make sure you have the bowl, lid and sometimes the pusher assembled correctly. If everything is not correct it will not activate the safety switch to allow it to start up.

KitchenAid Food... | Answered on Feb 28, 2019 | 114 views

take it back and get a warranty replacement unit
reading the user manual may be a help

KitchenAid Food... | Answered on Sep 10, 2018 | 251 views

Possibly something about either the lid or the bowl has become deformed. Very likely you will need to replace one or the other.

KitchenAid Food... | Answered on Sep 08, 2018 | 273 views

The solution is 90% going to be replace the lid, or replace the bowl or if you are very unlucky replace both. A proper KitchenAid service agent should have both parts on the shelf and will be able to try a new one of either to see where the fault lies. I think over the years I've replaced more lids than I have bowls.

KitchenAid Food... | Answered on Feb 28, 2018 | 288 views

Find your model number on the list and look for parts Kitchenaid Food Processor Replacement Parts Accessories Sears PartsDirect

KitchenAid Food... | Answered on Dec 20, 2017 | 230 views

Read the handbook and make certain you are assembling the bowl, lid and pusher correctly, they can all play a part in activating the safety mechanisms that put the appliance in the mode that will allow it to be started.

KitchenAid Food... | Answered on Nov 24, 2017 | 2,247 views

hi kimberly.
not sure if this link will help you out but have a look.
How to use the dough blade with my kitchenaid food processor Google Search

KitchenAid Food... | Answered on Nov 02, 2017 | 152 views

Without step-down transformers you are out of luck. I am sorry. I know the transformers are ugly but they are cheaper than replacing your food processor and espresso machine. One thing you could do is to contact Kitchen Aid and ask them if the motor can be wired for 240V. If not, ask them if you can purchase the 240V motor for your processor and replace it directly. As for the espresso machine, no idea...sorry.

KitchenAid Food... | Answered on Oct 26, 2017 | 264 views

food processors have interlocks between the bowl, the top and the base. Inspect to see that those are all making. When you lock the bowl to the base and the top to the bowl you should hear some clicks and see some interlock mechanisms line up at the back of the bowl.

KitchenAid Food... | Answered on Aug 03, 2017 | 238 views

I don't see anything other than hot water and brute force doing anything to help. Probably a two person job and make sure you turn it the right way. Be prepared for something to be broken or damaged.

KitchenAid Food... | Answered on Jul 02, 2017 | 289 views

They now have moved over to an app for that

KitchenAid Food... | Answered on May 12, 2017 | 164 views

The problem will be either the lid or the bowl, both have mechanisms in them that wear/break. Take the processor into a service agent that carries the parts along with your clean bowl and lid. It will be a simple matter for them to try one or the other to see which one makes the difference. I am a service agent and that's what I do, it's far the easiest way to quickly find the problem.

KitchenAid Food... | Answered on Apr 02, 2017 | 257 views

Not finding what you are looking for?
KitchenAid KFP760 12 Cups Food Processor Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts


Level 2 Expert

138 Answers

john h

Level 3 Expert

22486 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides