20 Most Recent
Questions & Answers
I am having trouble with my Bowflex TC5000.
The motor must move the drive pulley for calibration to pass. remove rear covers and check drive belt. you should hear the lwr board relay click to engage the motor. if you hear it and the motor does not move and you have checked the belt then you need to test the motor. Typically remove the belt and turn by hand...it should be very smooth and spin freely. If not replace the motor. Direct 9 volts to the motor leads unplugged from the board will tell you if the motor is good. be careful as capacitors are present and risk of shock is always possible. capacitors stay charged for about 10 mins after unit is unplugged
on Sep 23, 2019
Tc3000 not calibrating
Sounds like it's the controller. Those are very hard to find parts. Most repairs on Bowflex are nearly impossible after the machine is about 4 years old.
on Jun 16, 2017
Can't get Bowflex TreadClimber TC5000 to pass calibration.
AT FIRST YOU MUST REMOVE COVER AND SEE CAREFULLY TO FIND SENSORS SOME SENSORS ARE PHOTO SENSOR AND GET ON DUST AND CAN NOT GOOD WORK THEN BETTER THIS IS YOU CLEAN DUST VERY VERY GOOD PERHAPS SOLVE YOUR PROBLEM.
you can countiue contact us with smart phone on wattsapp or telegram by :
on Apr 18, 2017
Not finding what you are looking for?