20 Most Recent Bowflex Treadclimber - Page 4 Questions & Answers


I have the exact problem. My machine is 3 days old. I am also getting this H03, H13, H24 error. I called the 1-800 number for the Treadclimber TC20 and they informed me that a handful of machines were sent out with a bad control board. I am waiting for a replacement board.

Bowflex... | Answered on Jan 12, 2014


May be locked. Unlock using lever in front

Bowflex... | Answered on Jan 04, 2014


Please RUN the software calibration for easy diagnostic and fix it.
go under the HOOD motor follow the steps, or read your owner manual /download from www. fitness.manualsonline.com

GOD BLESS YOU

Bowflex... | Answered on Dec 02, 2013


see the video attached. and fix it. God bless you

Bowflex... | Answered on Oct 18, 2013


follow this steps and fix it. God bless you

Error 5
Description
The power up test sequence has detected a key in the operated condition. The power up test
sequence is performed every time the unit is turned on (powered up). This test is performed
because a permanently stuck key will inhibit the correct operation of the unit.
Possible Causes
1. A key on the display housing is permanently stuck in the operated condition.
2. One of the upper PCA's keypad interface chips has failed.
3. Liquid (perhaps perspiration) is present on the surface of a touch sensitive display.
Possible Remedies
1. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is no longer present, the keypad is the cause. The keypad is typically part of
the display housing. Replace the display housing to correct the problem.
2. Remove the keypad connector cable from the upper PCA. Restart the power up sequence, if
the ERROR 5 is still present, the upper PCA is the cause. Replace the upper PCA to correct
this problem. Most upper PCA's are provided without software. Therefore, the software (chip)
must be removed from the upper PCA being replaced and re-installed on the replacement
upper PCA.
3. Wipe the surface of the touch sensitive display clean of all liquid. Restart the power up
sequence, if the

Bowflex... | Answered on Oct 14, 2013


please make this steps and fix it. God bless you

Probable Cause 1. AC input voltage is incorrect.
2. AC input voltage transients. Transients can be caused by lightning strikes or by other pieces of equipment sharing the unit's AC power.
Corrective Action
  1. Verify AC feed into the building's circuit breaker is correct and connected to the proper transformer tap.
  2. Ensure the AC grounding for the unit's outlet is good and verify the unit is connected to an isolated and dedicated 20 amp circu
b80ae6f0-7058-4cf8-8924-076f1a526595.gif

Bowflex... | Answered on Aug 24, 2013

Not finding what you are looking for?
Bowflex Treadclimber Logo

349 questions posted

Ask a Question

Usually answered in minutes!

Top Bowflex Exercise & Fitness Experts

Ekse

Level 3 Expert

13434 Answers

Bob Hawk

Level 1 Expert

2 Answers

ray gallant

Level 3 Expert

66248 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bowflex Exercise & Fitness

  • Bowflex Exercise & Fitness

Most Popular Question

am getting l5 error belt stops

  • Exercise & Fitness
Loading...