Top 20 Kenmore 65942 Electric Dryer - Page 5 Questions & Answers


unplug dryer and if the valve still leaks, replace water valve.

Kenmore Dryers | 134 views | 0 helpful votes


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes

Kenmore Dryers | 533 views | 0 helpful votes


Something obstructing the vent blower path

Kenmore Dryers | 64 views | 0 helpful votes


I think its called a thermocoupler It is likely burnt out and needs replacing. Not sure but i think that's what its called.

Kenmore Dryers | 60 views | 2 helpful votes


There should be one inside console area

Kenmore Dryers | 301 views | 0 helpful votes


The Kenmore 417.81102003 dryer control lock feature should be toggled on and off if you press and hold the Add Steam button for 5+ seconds. The Add Steam is the second button from the left in the top row of buttons. When the lock is enabled, the LCD screen should show LOC when you attempt to wake the dryer. There is nothing in the manual about a double-beep when the control lock is enabled. Dryers from this manufacturer, Frigidaire, can beep multiple times if you press the buttons too hard.

This is shown on page 10 of the manual which is available from Sears Parts Direct: https://www.searspartsdirect.com/partsdirect/user-manuals/41781102000-kenmore-elite-parts-manual . (Note: the final 3 can be ignored. That indicates the cabinet color.) The direct link to the manual is https://c.searspartsdirect.com/mmh/pd_download/lis_pdf/OWNM/1102004L.pdf .

I hope this helps.

Cindy Wells

Kenmore Dryers | 133 views | 0 helpful votes


If it is a mechanical timer, replace the timer. The switches in some of these are nothing more than copper traces on a piece of circuit board with a copper wiper that moves over them. The friction eventually wears out these copper traces. This would be one explanation for the heat to work on one setting but not another. If it is a digital electronic timer, I would replace the control board. Good luck.

Kenmore Dryers | 146 views | 0 helpful votes


Will it plug in? May as well, what do ya have to loose?
If we're wrong you can always buy a new one, right?

Kenmore Dryers | 55 views | 0 helpful votes


I DON'T KNOW. DOWN IN THIS LINK MIGHT BE OF
ASSISTANCE.
< https://www.applianceblog.com/mainforums/threads/6860-Clean-filter-light-won-t-go-off >

---------------------------------------

Kenmore Dryers | 59 views | 0 helpful votes


How can I connect the extension pipe of the Drumel 4000 to the
machine it's self.
Anthony.

Kenmore Dryers | 68 views | 0 helpful votes


Some models have a resistor located near timer in console that would cause that. If not, then probably the timer.

Kenmore Dryers | 72 views | 0 helpful votes

Not finding what you are looking for?
Kenmore 65942 Electric Dryer Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Dryers

  • Kenmore Dryers

Most Popular Question

kenmore 70 series electric dryer

  • Dryers
Loading...