Hobart A200 Stand Mixer - Page 4 - Answered Questions & Fixed issues


My fantastic guy just rebuilt my A200. He says it's likely that your back plate is slightly off center so that the center arbor is touching the windings-- any contact and the machine won't run. The tolerances are thousandths of an inch in there.

Hobart A200... | Answered on Dec 07, 2011 | 645 views


not looing for any.....

Hobart A200... | Answered on Nov 11, 2011 | 46 views


Go to an auto parts place and buy some Lubriplate grease and use this on the assembly.

Hobart A200... | Answered on Nov 09, 2011 | 248 views


Punch and hammer. It's best to remove the planetary so you can support the shaft while driving it out. If not it puts a lot of unnecessary stress on the bearings and other parts.

Hobart A200... | Answered on Sep 13, 2011 | 93 views


May have damaged the start switch in the back of the motor. Check www.hobartservice.com for your local Hobart office.

Hobart A200... | Answered on Sep 13, 2011 | 93 views


Hammer and punch. Best to remove planetary so you can support the shaft. If not it puts a lot of unnecessary stress on the bearing and other parts.

Hobart A200... | Answered on Sep 13, 2011 | 184 views


Drive it out with a punch and hammer. It's best to take the planetary off the machine so you can support the shaft. If not it puts a lot of unnecessary stress on the bearings and other parts.

Hobart A200... | Answered on Sep 13, 2011 | 634 views


Use the contact link at www.hobartcorp.com.

Hobart A200... | Answered on Sep 13, 2011 | 246 views


Are you trying to remove the assembly from the machine or the gear from the shaft?

Hobart A200... | Answered on Sep 13, 2011 | 57 views


Go to www.hobartservice.com to locate the parts manual and your local Hobart office.

Hobart A200... | Answered on Sep 13, 2011 | 89 views


If it has the lubricant specified by Hobart then it is not toxic.

Hobart A200... | Answered on Sep 13, 2011 | 141 views


Check www.hobartservice.com for your local Hobart office.

Hobart A200... | Answered on Jun 28, 2014 | 228 views


There is a lever that is riveted to the shaft that controls the movement of the diving key. It may be broken. Email me and let me know what you found. robert.vest@hobartservice.com

Hobart A200... | Answered on Sep 13, 2011 | 258 views


You can get a parts breakdown at www.hobartservice.com.

Hobart A200... | Answered on Sep 13, 2011 | 270 views


Transmission has to be somewhat disassembled, grease removed, lower seal should be replaced and then grease added and reassembled. Not that easy to do. Check www.hobartservice.com for your local Hobart office.

Hobart A200... | Answered on Sep 13, 2011 | 406 views


Detroit, MI

43442 N. I-94 Service Dr.

Belleville, MI 48111

Phone: (734) 697-3070

Fax: (734) 697-1995

Service E-Mail:
DetroitMI.service@hobartservice.com

Parts E-Mail:
DetroitMI.parts@hobartservice.com

Hobart A200... | Answered on Sep 13, 2011 | 140 views


Chicago, IL

2185 Estes Ave.

Elk Grove Village, IL 60007

Phone: (847) 631-0070

Fax: (847) 631-0072

Service E-Mail:
ChicagoIL.service@hobartservice.com

Parts E-Mail:
ChicagoIL.parts@hobartservice.com

Hobart A200... | Answered on Sep 13, 2011 | 168 views


It's not oil in the A200, it's #2 weight grease. Although when it gets old enough it can break down far enough to basically become oil (either that or someone put oil in it previously). There are a number of answers written on fixya.com explaining how to disassemble the transmission and change the grease. Fill with 36 ounces #2 grease. FYI : disassembling the transmission and changing the grease is a very messy task and one can VERY easily reassemble the transmission incorrectly, so consider bringing the mixer to Hobart to have the job done.

Hobart A200... | Answered on Sep 02, 2011 | 793 views

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

370 questions posted

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1361 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...