20 Most Recent Hamilton Beach 68330 4 Quart Ice Cream Maker Questions & Answers

Could have got salt and water in the top of the motor which siezed the motor shaft. If it humms try taking it apart and spray some WD40 on the motor shaft and other shafts
Make sure it is unpluged first!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hamilton Beach... | Answered on Aug 09, 2009

here it is:
u may have to make a free and quick acct if it asks
hope it helps!

Hamilton Beach... | Answered on Nov 23, 2008

Best Buy sells these for about $30. Other sellers do so for about $55. If it is under warranty, I suppose you could make use of that. Otherwise, I cannot imagine any fix for this that would cost $30. But you can check the warranty below and even call the 800 number and inquire.

Support HamiltonBeach com

Hamilton Beach... | Answered on Jan 04, 2018

start here:


Hamilton Beach... | Answered on Jan 14, 2016

My friend bought this item last week at Target for the $99 sale price. The reviews were all horrible about the red light (add water) indicator going on after the first or several first ice cube runs and never going out. About 40 out of 60 reviewers had this problem. We experienced it right after the first run when the ice cube full light went on. We emptied it and the add water red light was on. I looked all over the web for a solution and only found one that suggested tilting the unit backwards for 45 degrees and that would magically reset the light. It did not after several angles, light taps and basic shaking. Since there was no alternative and everyone who returned it also got the exact same problem with the new replaced model - we decided to open it up and investigate.
The electronics diagram is on the back of the machine and tell you where the water indicator is. We took it out (an inch long black tube along the water pump and backflow valve) and dried it completely. The cycle still had the red light. We submerged it completely in water and the red light still went on saying that the unit needs water. We determined that this is the bad part and the water indicator is faulty. We cut it out and joined the two wires. IT ALL WORKS NOW FLAWLESSLY. You only have to shut the unit off when you leave since it will ocntinue to run if out of water. If you're looking for a quick mechanical fix and have a unit that works when you need it and you are around - this isthe fix.

Ice Cream Makers | Answered on Jan 25, 2020

In 1911, Frederick Taylor published The Principles of Scientific Management, in which he explains how productivity can be greatly improved by applying the scientific method. ... Scientifically select, train, and develop each worker rather than passively leaving them to train themselves.

Ice Cream Makers | Answered on Aug 18, 2019

Sounds like that is to stop it becoming frozen solid. When the liquid reaches 'Soft Serve stage, it beeps, and then you turn it down to 'conserve' or 'serve'. That setting keeps it soft to dispense.

here is the manual. Read Page 6


Here is a video


Ice Cream Makers | Answered on Jun 30, 2019


Ice Cream Makers | Answered on May 27, 2019

Not finding what you are looking for?
Hamilton Beach 68330 4 Quart Ice Cream Maker Logo

Popular Tags

8 questions posted

Ask a Question

Usually answered in minutes!

Top Hamilton Beach Ice Cream Makers Experts


Level 3 Expert

85223 Answers

ray gallant

Level 3 Expert

66490 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Hamilton Beach Ice Cream Maker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hamilton Beach Ice Cream Makers

  • Hamilton Beach Ice Cream Makers

Most Popular Question

ice cream freezer purchased last year

  • Ice Cream Makers