20 Most Recent Samsung SW62ASP Top Load Washer Questions & Answers


Just had a samsung repair tech come out today to fix this issue. He said the issue is the breaker. They can not run on a D breaker. Need a GE or Seeman's breaker. That is what he said. I guess we'll see if that fixes the problem.

Samsung SW62ASP... | Answered on Feb 15, 2017


You can remove the front kick panel and remove the tub to pump hose to clean it out. You also have very easy to access from rear of washer

Check that the motor transmission coupling is not coming apart as well. You should never have to remove the tub, this is a very time and labor intensive job.

Samsung SW62ASP... | Answered on Dec 29, 2016


If the washing is not distributed evenly by the time it reaches the rinse/spin cycle, it goes back to rinse cycle. Be present at the machine when it reaches the spin cycle. observe the drum to see if it is of balance and swaying to the sides, if so distribute washing evenly. Usually happens if there is a big garment or more with smaller items,

Regards

Phillip

Samsung SW62ASP... | Answered on Dec 26, 2016


either clutch pawl tip broken or fallen off or capacitor fault

Samsung SW62ASP... | Answered on Nov 20, 2016


A drain valve that is supposed to close according to the setting on the machine is not doing so, probably due to a problem with the circuit board or with the solenoid that closes the drain. You need in person diagnosis.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Samsung SW62ASP... | Answered on Jul 10, 2016


I am seeing alot of these questions regarding samsung washers they are usually very good I am thinking there is too much weight in your washer, are you filling the washer too full, they can only handle so much weight before they just throw themselves into error codes. So if its clicking hit the power button does it drain the water, i am asking to see if the pump is working, if it drains , when its done unplug the unit wait ten minutes and plug it back in and turn power on, dont hit any other buttons what does it do?

Samsung SW62ASP... | Answered on May 02, 2016


ne3 error code

Samsung SW62ASP... | Answered on Jan 29, 2016


Dits a no fill error so you probably need to replace the water inlet valve. The link below goes into it in more detail. Samsung Washer Error Code NF Fixed

Samsung SW62ASP... | Answered on Nov 08, 2015

Not finding what you are looking for?
Samsung SW62ASP Top Load Washer Logo

327 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Paul

Level 2 Expert

381 Answers

Eric Rotmil
Eric Rotmil

Level 3 Expert

587 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Washing Machines

  • Samsung Washing Machines

Most Popular Question

error code 1e samsung top loader

  • Washing Machines
Loading...