Cuisinart DLC-10S Pro Classic Food Processor - Page 5 - Answered Questions & Fixed issues


Cuisinart toll-free at 877-339-2534 from 7 a.m. to 11 p.m. ET Monday through Friday and from 9 a.m. to 5 p.m. ET Saturday and Sunday or online at www.cuisinart.com and click on Product Recalls at the bottom of the page for more information on the voluntary recall.

Cuisinart Food... | Answered on Dec 14, 2016 | 342 views


The set screw on the blade assembly is loose. If the motor does not spin then that is a different story.

Cuisinart Food... | Answered on Dec 10, 2018 | 403 views


The control board (AKA PCB) will need to be replaced.

Cuisinart Food... | Answered on Nov 10, 2018 | 845 views


Check with a local appliance parts supplier.

Cuisinart Food... | Answered on Oct 19, 2016 | 242 views


Check with a local appliance parts supplier.

Cuisinart Food... | Answered on Oct 19, 2016 | 243 views


put the screws back and leave the cord alone it still works

Cuisinart Food... | Answered on Jul 14, 2016 | 346 views


Check this link to see if it is the right manual for you: https://www.cuisinart.com/share/pdf/manuals/dfp-14bcn.pdf

Cuisinart Food... | Answered on Jun 07, 2016 | 387 views


Contact Cuisinart customer support .

Cuisinart Food... | Answered on Nov 25, 2015 | 174 views


To to:
Food Processors Product Manuals Cuisinart com

and look for a machine that is from the same generation as yours (check the shape of the base).

For your 7-cup machine, a good manual might be the following:


Pro Classic Food Processor (DLC-10S)
Manual

Cuisinart Food... | Answered on Jul 29, 2014 | 217 views


You can go to: Food Processors Product Manuals Cuisinart com

Find one that is at least close, if they don't have your exact one. The manuals for each shape-size are pretty much the same... so find the one with the closest picture and size.

The chrome (DFP-7BC) is probably very close... (I'm guessing yours is the same only in white??)

Cuisinart Food... | Answered on Jul 28, 2014 | 560 views


You don't say what model, but all Cuisinarts have a safety interlock built in to the bowl assembly. The cover must be removed from the bowl to release this interlock before you can remove the bowl from the motor base.

Cuisinart Food... | Answered on Jun 16, 2014 | 1,018 views


If the unit works OK with other attachments and the problem is only with the one cup; then the blade may be loose and spins on the shaft, the connection gear under the bottom is worn or binding up. Debris is stuck around the blade shaft or from heating up the metal parts expanded and bind when turning.

Cuisinart Food... | Answered on Mar 10, 2014 | 208 views


dont you have a local man for small domestic items like this in your area ,look in the yellow pages or the local paper

Cuisinart Food... | Answered on Jan 10, 2012 | 50 views


Hi Mary,
Which model?Still checkout the models on the links below:

www.cuisinart.com/share/pdf/manuals/dlc-xp.pdf

www.cuisinart.com/share/pdf/manuals/fp-12dc.pdf

Hope this helps.If not,send me your model type and number.Thanks!

Cuisinart Food... | Answered on Jan 05, 2012 | 162 views


Chop no more than the recommended amount at one time. Press and release the PULSE button and check frequently to avoid nuts clumping together in a nut butter. When a recipe calls for flour or sugar, add some to the nuts before you chop, about 1/2 cup for each cup of nuts. This allows you to chop the nuts as fine as you want without turning them into a nut butter. You can also chop nuts with a shredding disc. The optional Fine Shredding Disc is particularly good. For nuts the recommended quantity is usually about 2 - 3 cups.
If after following the steps above the motor still does not roll try the following steps:

Cover may have become unlocked, check to ensure cover is properly placed and locked

Excessive strain may have caused motor to overheat and stop. Wait for the motor to cool, 5-10 minutes. A safety protector in the motor prevents excessive overheating. If the motor stops,
turn machine off. After 5-10 minutes, divide nuts into 2 batches and complete processing.

Amount of nuts may exceed maximum capacity. Remove half, and process in 2 or more batches.

Hope this support has been helpful?
Thank you for visiting FixYa.

Cuisinart Food... | Answered on Aug 05, 2013 | 257 views


Most likely, the problem is the safety switch at the top, where the lid latches in to, or, the nib on the lid could be broken, chipped or worn away.

Cuisinart Food... | Answered on May 07, 2011 | 276 views

Not finding what you are looking for?
Cuisinart DLC-10S Pro Classic Food Processor Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top Cuisinart Food Processors Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Brad Brown

Level 3 Expert

18127 Answers

Are you a Cuisinart Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...