Top 20 DISH Network ES161256 21.0 IR / UHF Pro Remote Kit for Receivers ES16 Questions & Answers


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Look up codes for TV here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

DISH Network... | 182 views | 0 helpful votes


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can lookup codes if needed here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | 195 views | 0 helpful votes


craneserv710,
I would need more information on if it has intermittent control of TV or satellite to provide the best information. I have listed some steps to try below for either situation!
Satellite:
If the remote has intermittent use on the satellite, ensure there is nothing that may be causing interference. For a TV1, this could be a fluorescent light, or a direct heat source blocking the IR signal. If it is a TV2, interference may be caused by a device that is powered on. You can try turning off equipment to see if interference is removed, or you can try moving the antenna on the back of the receiver. If it is sticking straight up, turn it parallel with the receiver. If it is laying flat, put it straight up.
Television:
If the intermittent control is for the TV functions, you may need to program a new code into the remote. There are multiple codes for a remote and some will work completely, while others only provide intermittent functions.
Let me know if you have any other questions, or if you can provide additional details! I'll be happy to assist you.
Tommy Faust
DISH Social Media Representative

DISH Network... | 81 views | 0 helpful votes


Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link http://www.mydish.com/support/teach-learning-remote-20-21 can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

DISH Network... | 550 views | 1 helpful votes


This may be what you are seeking.

https://communities.dish.com/t5/At-Home/Select-DVD-player-with-input-button/td-p/9443

I am assuming you have the DVD installed with the DISH. If not, the procedure can be googled.

DISH Network... | 33 views | 0 helpful votes


Did you connect to the output of a box? If so then it will usually come through your him I and doesn't require a scan. If cable set your menu setting to cable and not antenna.

DISH Network... | 25 views | 0 helpful votes


Just go to the DISH website for instructions and download the manual

DISH Network... | 30 views | 1 helpful votes


notify dish for assistance

DISH Network... | 187 views | 0 helpful votes


notify provider for assistance

DISH Network... | 60 views | 0 helpful votes


go to input or settings for input and choose cable or satellite not antenna

DISH Network... | 57 views | 0 helpful votes


Get a hold of dish network, you don't own the receiver it would be up to them to service it or replace it, but that doesn't sound normal for it to run all the time

DISH Network... | 979 views | 0 helpful votes


https://help.wwe.com/app/answers/kbdetails/a_id/103

Quoting from link shown:

How do I cancel my WWE Network subscription?
To cancel your WWE Network Subscription:
  1. Go to WWENETWORK.com.
  2. Login to your WWE.com account, if you are not yet logged in.
  3. Go to the Billing Information section of your account page.
  4. Click the "cancel your subscription" link.
  5. On the next page click the Cancel button.
If you subscribed to WWE Network through your Apple TV and are being billed through an iTunes account, click here for instructions on how to cancel.

Your subscription will remain active until the end of your current billing period.

DISH Network... | 74 views | 0 helpful votes


HDMI 1 if your going to be watching it more than other programs or HDMI 2 if you have cable and spend a lot of time on it. Personal preference is 2.

DISH Network... | 45 views | 0 helpful votes


What input are you using?

DISH Network... | 35 views | 0 helpful votes


This sounds like there is an issue with the power to the 722K. Really, the only step that MAY fix this issue is to do a hard reset. Basically unplug the receiver from the wall outlet for 10-15 seconds and plug it back into the wall outlet, not a surge protector. If you have done this and this is still happening, the issue is the receiver itself and your best option would be to get a replacement for it.

DISH Network... | 170 views | 1 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

DISH Network... | 33 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

DISH Network... | 412 views | 0 helpful votes


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]


DISH Network... | 56 views | 1 helpful votes


You can Google the exact model number of your TV. One of the pages that comes up will be from the manufacturer and will contain the manual under SUPPORT or DOWNLOADS.

DISH Network... | 42 views | 0 helpful votes


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts. ....

DISH Network... | 567 views | 0 helpful votes

Not finding what you are looking for?
DISH Network ES161256 21.0 IR / UHF Pro Remote Kit for Receivers ES16 Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

DISH Network IR Remote Control
DISH Network IR Remote Control

1,202 Questions

DISH Network DVR-625 DTV Receiver / 100-Hours Video Recorder
DISH Network DVR-625 DTV Receiver / 100-Hours Video...

270 Questions

DISH Network ViP622 DVR DTV Receiver / 180-Hours Video Recorder
DISH Network ViP622 DVR DTV Receiver / 180-Hours Video...

171 Questions

DISH Network 322 DTV Receiver
DISH Network 322 DTV Receiver

120 Questions

DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder
DISH Network ViP722 DTV Receiver / 350-Hours Video...

120 Questions

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76177 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DISH Network Televison & Video

  • DISH Network Televison & Video

Most Popular Question

sanyo tv code dish remote 21 0 ir uhf

  • Televison & Video
Loading...