20 Most Recent Delta SM100M 13 Amp 10" Compound Miter Saw Questions & Answers


To unlock a miter saw, push down on the saw to unlock the head and loosen the knob on the table to make adjustments. Start using a miter saw with help from a custom furniture maker in this free video on woodworking tools. Read more: How to Unlock a Miter Saw How to Unlock Miter Saw Best Miter Saw Reviews Real Man Miter Saw

Delta SM100M 13... | Answered on Nov 22, 2019


http://www.ereplacementparts.com/guard-you-will-need-order-48887000-center-plate-p-89251.html?osCsid=n1f7mnemsda5as6odhsr04m1i3

As long as your model number was good..... You don't need the entire assembly right? Just the guard. $14+ +shipping.

Delta SM100M 13... | Answered on Oct 08, 2012


There should be a wench on the mecnine that fits the bolt. the bolt turns in the oppiste derection as a normal bolt its called left handed thread this keeps it from coming lose during use. There is a buttom you need to press to lock the shaft then lossen to bolt lift the blade gaurd replace the blade note the washers that go up against the blade and make sure you install then in the same order as they were removed

Delta SM100M 13... | Answered on Jul 14, 2012


Most of them have a horizontal pin about a 1/4" in diameter in the back of the saw where it hinges. Just need to pull out the pin.

Delta SM100M 13... | Answered on Jun 14, 2010


Exploded diagram for your SM100M miter saw is here.
User manual is here.

Page 20 covers blade change operation.

Make sure you unplug your saw! You need to remove a screw from the cover and rotate the cover to the rear. Use a hex wrench in the motor shaft to keep the saw blade from turning, and loosen the arbor nut with a 1/2" wrench. The arbor is reverse threaded, so you'll turn it clockwise to loosen, then counterclockwise to tighten it up after you have swapped the blade.
Rotate the cover back after that's done, and replace the screw.

If this was useful, please vote. Thanks.

Delta SM100M 13... | Answered on Jun 14, 2010


Exploded diagram for 36-220 is here.
Operators manual is here.

Once you have ID'd the index spring on the exploded diagram, you should be able to order it from Delta, assuming it's still a part they stock. If they no longer stock it, you may be able to find someone who does still stock it by a google search of the part number.

I've got a bad feeling this part may be very difficult to acquire though.

If this answer was useful, please vote. Thanks.

Delta SM100M 13... | Answered on Jun 14, 2010


Could be the wear plates under the table between it and the base. Or if it doesn't have any then the two mating surfaces are dry and rubbing causing this problem I would suggest going to Dewaltservicenet.com and typing in your model number and downloading a breakdown for the tool. To remove the table on most saws you have to remove the fence and that requires that you square everything up upon disassembly. Let me know and I will try and help further. By the way to clean the parts I use a surface conditioner with something like a scrubbing pad and then after everyting clean use a dry silicone lubricant or equivelant.

Delta SM100M 13... | Answered on Sep 14, 2009


Unless the motor was replaced it should not require reversal.

To reverse the motor you need to swap either the start windings or run windings. See motor name plate.

Delta Saws | Answered on Jan 11, 2020


Red to red, black to black, blue to bits. get someone to do it for you mate.

Delta Saws | Answered on Dec 22, 2019


Check with Delta regarding availability.

Delta Saws | Answered on Sep 07, 2019


Were can I find the owners and part manuals for a Rockwell 28-20c bandsaw . Thanks Dennis

Delta Saws | Answered on Aug 24, 2019


Contact Delta directly to request the manual.

Delta Saws | Answered on Jul 26, 2019

Not finding what you are looking for?
Delta SM100M 13 Amp 10" Compound Miter Saw Logo

Popular Tags

18 questions posted

Ask a Question

Usually answered in minutes!

Top Delta Saws Experts

John Trevino

Level 3 Expert

1420 Answers

Asmodius

Level 1 Expert

12 Answers

ray gallant

Level 3 Expert

66120 Answers

Are you a Delta Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Delta Saws

  • Delta Saws

Most Popular Question

open miter saw

  • Saws
Loading...