Tylo DELUXE 7 Sauna Heater 7 kW - Answered Questions & Fixed issues


check recirculation pump if on check heater element if ok check temp sensor

Tylo Pool & Spa | Answered on Oct 19, 2019 | 46 views


check voltage to unit if ok check switch if ok check transformer or fuses if bad check heater or recirculation pump

Tylo Pool & Spa | Answered on Dec 02, 2017 | 137 views


if calling for heat check heater element

Tylo Pool & Spa | Answered on Dec 02, 2017 | 138 views


Mastercraft would be a possible source.

Pool & Spa | Answered on Nov 27, 2019 | 17 views


unlikely. You check it is has power, you check if it is seized, you replace it.

Pool & Spa | Answered on Nov 24, 2019 | 20 views


http://laundry.manualsonline.com/manuals/mfg/hotpoint/wma22_wma20.html
Doesn't say, other than to take the dispenser drawer out and clean the grate
This video is for an older version but the general theory is the same. Inside the piping at the bottom
https://www.youtube.com/watch?v=uyXvsbDMkrs

https://www.washerhelp.co.uk/forums/topic/81-wheres-the-pump-filter-on-a-hotpoint-washing-machine/

Pool & Spa | Answered on Nov 15, 2019 | 17 views


#1 DO NOT USE IT IF IT IS VENTING SMOKE INTO THE HOUSE. Seriously, CO poisoning is not what you want.

#2 Please tell us the make and model, so we can figure out what E1 means.

Pool & Spa | Answered on Nov 13, 2019 | 21 views


I SEE NO PUMP LISTED HERE

Pool & Spa | Answered on Nov 12, 2019 | 21 views


Assuming that is either fiber glass or some sort of Acrylic tub, the best way to clean it is to drain and wipe the surface with white vinegar and then rinse with clean water.
Be sure to use a hose end filter when re-filling the tub so you will not get dirt into the tub again. Here is a link to a hose filter on Amazon.

J

/uploadswith image

Pool & Spa | Answered on Nov 05, 2019 | 45 views


BE EXTRA CAUTIOUS WHEN WORKING WITH ELECTRICITY. THERE MAY BE A PROBLEM WITH YOUR SPA's WIRING, CONTROLS ETC. - OR - THE
CURCUT BREAKER MAY NEED REPLACING.
DISCONNECT OTHER ITEMS THAT ARE ON THIS SAME CIRCUT [ IF ANY ] TO CONFIRM THE SPA IS THE ONLY THING INVOLVED. IF POSSIBLE, CONNECT SPA TO ANOTHER CIRCUT. UNLESS YOU ARE EXPERT AT THIS, PLEASE CALL AN ELECTRICIAN TO FAULT FIND BEYOND THESE SIMPLE CHECKS.

Pool & Spa | Answered on Nov 02, 2019 | 22 views


run filter and keep changing next time use filter on hose

Pool & Spa | Answered on Nov 02, 2019 | 28 views


Is the water pump delivering water to the jets? If not, then you may have an airlock. Prime the pump and check again. If you have water coming from jets but still no heat, then it may be time for a new heater section.

Pool & Spa | Answered on Oct 30, 2019 | 159 views


see if voltage past switch if to lights bad lights if no voltage past relay bad relay or switch

Pool & Spa | Answered on Oct 20, 2019 | 193 views


either flame sensor dirty or bad or blocked burner tube

Pool & Spa | Answered on Oct 19, 2019 | 46 views

Not finding what you are looking for?
Tylo DELUXE 7  Sauna Heater 7 kW Logo

Popular Tags

0 questions posted

Ask a Question

Usually answered in minutes!

Top Tylo Pool & Spa Experts

Bill Jordan

Level 2 Expert

375 Answers

john h

Level 3 Expert

22486 Answers

David Spradling
David Spradling

Level 3 Expert

10383 Answers

Are you a Tylo Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...