20 Most Recent Clymer Evinrude/Johnson 2-40 HP Outboards Includes Electric Motors 1973-1990 - B732 Questions & Answers

4 Answers

Where can I download a free manual for Evinrude 4HP motor.

Adampeake how do you download free from the web link
they wanted $19.99USD

Clymer... | Answered on Apr 20, 2019

1 Answer

115 johnson moor spits and sputters when idle and stalls when shifted into gear

get the carbs rebuilt cleaned

Clymer... | Answered on May 20, 2018

1 Answer

What is model year for my Johnson 48 hp outboard engine with model # J48ESLCCC

1988

Clymer... | Answered on Apr 02, 2016

1 Answer

We replaced the water pump on a 1990 Evinrude 25 hp motor, but it isn't working. Can you help us?

It may look easy in the book but there are a few things that can go out. Such as the key/roll pin that drives the impeller can slip out on assembly. Water tube out of hole or damaged OR pieces of old impeller in it depending on why you needed to replace it. There are more but if you are not a trained tech it may be time to find one.

Clymer... | Answered on Dec 13, 2014

1 Answer

55973 A EVINRUDE Wiring Diagram IN COLOR FOR Free

Red battery positive
Red purple, switched positive
Yellow red startermotor connect to positive to start )
Purple white choke (connect to positive to choke)
Black yellow stop circuit ( connect to negative to stop engine )
Black battery negative ( for stop circuit )

Clymer Boating | Answered on Oct 04, 2017

1 Answer

Yamaha 25 nmo

The power supply is common for all the coils.
Have you switched the coils (wires marked 1 and 2)? If still the same coil non sparking, replace that coil.
If the same output non sparking, check the pulser coil for that cylinder. Invert both pulser coil connections (white red and white black). If the miss is on the same cilinder, replace the cdi. If the miss is on the other cylinder: replace that pulser coil.

Clymer Boating | Answered on Oct 04, 2017

1 Answer

I have an Evinrude jet drive outboard motor that

I think you have to look at a fuel supply problem. Clogged carbs or bad fuel pump...
Also have a look at your spark plugs...

Clymer Boating | Answered on Sep 25, 2017

1 Answer

Outboard 115 yamaha misfiring at low revs

clean carbs and check set up !

Clymer Boating | Answered on Jun 04, 2014

1 Answer

Suzuki 175 outboard schematic

try this
http://www.boats.net/parts/search/Suzuki/Outboard/2009/DF175/parts.html

Clymer Boating | Answered on Jun 02, 2014

0 Answers

1994 48 hp evinrude not charging

Clymer Boating | Posted on Apr 13, 2014 | Be the first to answer

0 Answers

Weight of 1994 48SPL evinrude outboard

Clymer Boating | Posted on Mar 18, 2014 | Be the first to answer

1 Answer

How do I separate a stuck lower unit on a 1984 25hp Evinrude?

IF IT DROPPED PERHAPS 1/2 INCH THE SHIFT ROD NEEDS DISCONNECTED .

Boating | Answered on Nov 30, 2019

1 Answer

Parts diagram 15012 Evinrude outboard motor

GO SEE YOUR LOCAL DEALER FOR ASSISTANCE

Boating | Answered on Nov 24, 2019

1 Answer

Is a 1971 evinrude Model18102SC a short or long shaft

MEASURE IT AND GET SMARTER FOR YOURSELF

Boating | Answered on Nov 23, 2019

1 Answer

Haswing trolling motor, power on , 3 lights , have reset the machine but it wont run the motor, or turn . Jim

Have the battery pack tested.

Boating | Answered on Nov 19, 2019

0 Answers

How to reflash the emm on Evinrude ficht outboard motors

Boating | Posted on Nov 11, 2019 | Be the first to answer

0 Answers

My minkota 101lbs 36 volt vantage motor stopped working while i was using it and had to take it off of boat because i could not even raize motor

Boating | Posted on Nov 10, 2019 | Be the first to answer

1 Answer

I have a 1975 2 horse and I would like to no how to get prop off

I think there is a nut holding the prop to the shaft and there might be a shear pin going through the prop and shaft. Remove those to get the prop off. It may have been on so long, there might be rust and other junk holding it on. Spray with penetrating oil and let sit to loosen the rust.

Boating | Answered on Oct 31, 2019

1 Answer

I have a 2003 chris chraft constelation 26' i have been searching for an operations manuel, not a owners manuel, any help please

I suggest you post your question on this forum:

http://www.boatered.com/forum/topic.asp?TOPIC_ID=131726

Boating | Answered on Oct 30, 2019

1 Answer

Evinrude 2016 135 hp, where is tilt manual release and how to manual release as tilt/trim won't work

I suggest you go to this site and obtain a manual for your Evinrude engine. Hope it helps:

Literature

Boating | Answered on Oct 30, 2019

Not finding what you are looking for?

4 questions posted

Ask a Question

Usually answered in minutes!

Are you a Clymer Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Clymer Evinrude/Johnson 2-40 HP Outboards Includes Electric Motors 1973-1990 - B732? Or just drag it here!

View Most Popular

Clymer Boating

Clymer Boating

115 johnson moor spits sputters when

Boating

20 Most Recent Clymer Evinrude/Johnson 2-40 HP Outboards Includes Electric Motors 1973-1990 - B732 Questions & Answers

Where can I download a free manual for Evinrude 4HP motor.

115 johnson moor spits and sputters when idle and stalls when shifted into gear

What is model year for my Johnson 48 hp outboard engine with model # J48ESLCCC

We replaced the water pump on a 1990 Evinrude 25 hp motor, but it isn't working. Can you help us?