20 Most Recent Provo Craft Cricut Disney Font Cartridge Questions & Answers

I would contact cricut because you may have a defective machine. I had an expression and cut one thing then it froze. We did the reset and that did not resolve the issue. Cricut had me send my machine back and they shipped a new one. Mind you they will put a charge on your credit card only to protect themselves. You just ship yours to them the way they tell you in the one you receive. Let me know if you do not have their contact number.

Provo Craft... | Answered on Sep 15, 2019

1-Open Cricut Craft Room with circuit on and flashing green/red
2-Hold power & feed button together until both are solid green
3-You'll be prompted to update firmware
4-Press & hold two buttons again (keep holding)
5-initiate firmware update
6-Let sequence go until 99% ...you may hear a sequence of beeping, don't be alarmed
7-Release buttons
8-You'll be prompted to restart your machine
9-Unplug all plugs from Cricut
10-Wait 30 seconds
11-Plug in both cords
12-Power on Cricut
13-Light should be solid green
14-Press OK on Craftroom prompt on computer

Provo Craft... | Answered on Mar 24, 2016

which machine are you using and what is it doing exactly?

Provo Craft... | Answered on Nov 10, 2015

what machine are you using ie expression or E2

Provo Craft... | Answered on Nov 10, 2015

You may want to try resetting your Cricut to see if that fixes the problem. To reset the Cricut machine, turn the unit off for five minutes. Roll all the dials all the way up and all the way down five times each. Turn the Cricut back on. This is the manufacturer's reset process. Good luck!

Provo Craft... | Answered on Oct 15, 2015

Cricut does not accept jpegs. They use their cartridges that come with the machine and others that you can purchase. However if you have Cricut Design Studio you can design your image with the cricut. Any further questions feel free to ask.

Provo Craft... | Answered on Dec 31, 2014

Mine has just done the same, have you found a solution?

Provo Craft... | Answered on Nov 21, 2014

Same here if you figure it out please let meknow..

Provo Craft... | Answered on Apr 16, 2014

The same thing is happening with mine. I probably haven't used it over 12 times! It came on initially, then went off. It hasn't come on since! Don't look to get any help from Provo Craft, as you've probably already found out. I can't find any place that repairs them, but on eBay they sell refurbished ones...odd. So, someone knows how to repair them!

Provo Craft... | Answered on Feb 05, 2014

I need more information. Are you using Cricut Design Studio or cutting just from the cricut itself. If you're cutting from Design Studio then you need to make sure your letter is within the space of the mat. If there is some hanging off the edge or past the cut line then it will skip over it and not cut it.

Provo Craft... | Answered on Dec 02, 2013

Not finding what you are looking for?
Provo Craft Cricut Disney Font Cartridge Logo

Popular Tags

74 questions posted

Ask a Question

Usually answered in minutes!

Top Provo Craft Crafts & Hobbies Experts

R.A. Ellis
R.A. Ellis

Level 3 Expert

12731 Answers


Level 2 Expert

89 Answers

ray gallant

Level 3 Expert

66169 Answers

Are you a Provo Craft Craft and Hobby Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Provo Craft Crafts & Hobbies

  • Provo Craft Crafts & Hobbies

Most Popular Question

when cricut cutting tears paper even

  • Crafts & Hobbies