20 Most Recent Mitsubishi MS-A09WA Split System Air Conditioner Questions & Answers


Good day,

I would like to have a model no. Things to look at. Is the filters clean? If yes then we carry on to the next step. Check power stability but that should not be the problem. Your next step is to find out what gas it's using. If using R410, then make sure there was no leak. If there is a leak you have to drop all the gas and weigh in new gas. On your system should be information on how much gas it takes as n standard. Every unit new come pre charged with gas for 10 meters. If your pipework is longer than 10 meters then additional gas should be added. If not it can take the amount that is shown on the info sticker.
You have to vacuum and put new gas. But you have to put it in as n liquid. If u canot do this yourself please call a qualified HVAC tech.

Thanks

Mitsubishi... | Answered on Jan 05, 2018


Hi,
Here is where you can find all the info you will ever need about Mitsubishi Air Conditioning units...
Check out this tip that I wrote about that...

Mitsubishi Air Conditioner Troubleshooting and Repair
https://www.fixya.com/support/r5643983-mitsubishi_air_conditioner

heatman101

Mitsubishi... | Answered on Feb 05, 2015


standard is the pc board,propably the indoor,samsung has codes for the boards and put them with the remote control.call them and tell them the model to give you the code to rearrange the pc board.and its not to difficult to put the code with the remote control.

Mitsubishi... | Answered on Jan 11, 2015


No, a condensing unit has enough refrigerant to go about 35 ft or less, so less is noyt going to be a problem unless you added more than 35 feet and added more refrigerant even then 10 feet will not be much and not enough to adversely affect the operation

Mitsubishi... | Answered on Aug 07, 2013


If your unit is only 8 months old, then it should still be under warranty! Suggest you check the drain line to make sure that nothing has decided to make it home.

I would check the level of your unit to make sure that there is a slight grade to the rear of the unit, but I hesitate to tell you to shim it.

Mitsubishi... | Answered on Jul 26, 2011


Dint spray WD 40 for maintenance on the fins?? that does nothing good and apparently is dong something bad actually.

WD 40 means ,,,,, Water Displacer and it was their 40th recipe!!

Its great for removing roof sealants from your hands, or tar, oil etc, but a terrible lubricant
and the motors today require no oiling, so cut the WD 40 routine its not doing anything you want and is dong everything you dont want.

Mitsubishi... | Answered on Dec 27, 2010


icing bad or just abit? its normal to have water on it if its icing under the black foam insulation you have a gas problem gas leak, or a fan not working

Mitsubishi... | Answered on Nov 10, 2010


Hi,
The reset is to cycle the power.... turn off again for a few minutes and then turn back on.... but you may have blown a cicuit baord..

heatman101

Mitsubishi... | Answered on Aug 30, 2010


Any error codes? If not there may be a mechanical fault with the compressor/inverter. The unit is possibly short on refrigerant, so the compressor is not getting enough suction cooling from return gas, so may be clicking off on its internal over temp klixon.

all the best

Mitsubishi... | Answered on Jul 10, 2010


The check light request the user to contact a professional to check the unit.
Hope this helps I take the time to help you so please rate me

Mitsubishi... | Answered on Jun 28, 2010

Not finding what you are looking for?
Mitsubishi MS-A09WA Split System Air Conditioner Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Heating & Cooling Experts

NOEL
NOEL

Level 3 Expert

8537 Answers

vince

Level 3 Expert

1234 Answers

Stuart Slabber

Level 1 Expert

25 Answers

Are you a Mitsubishi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mitsubishi Heating & Cooling

  • Mitsubishi Heating & Cooling

Most Popular Question

turn mitsubishi h1 split system

  • Heating & Cooling
Loading...