20 Most Recent Emerson LC320EM8 32 in. LCD TV Questions & Answers

My flatscreen emerson tv will not turn back on.

I found a way around this problem. When this happens, don't use the remote.

Walk up to the TV, then HOLD DOWN the power button and while the lights are flashing, start pushing the menu button on the TV at the SAME TIME.

Then your screen will turn on. No idea why this works. Just stumbled on it while getting ********** that this TV, I had less than a month, suddely would not come on anymore. I was about to unplug the whole thing to take back to WalMart and just started pushing button combinations and found this worked.

Emerson LC320EM8... | Answered on Apr 04, 2019

0 Answers

Flashing colors and wont respond

Emerson LC320EM8... | Posted on Feb 18, 2018 | Be the first to answer

1 Answer

Emerson LCD TV misfunctioning

Remove the connector that goes to the remote board and see if it stays then, if it does that board needs replacing, its not an expensive board, if it still changes on its own then its the main board that is bad, that one is much more money.

Emerson LC320EM8... | Answered on Feb 09, 2018

0 Answers

Tv flashes 13 times

Emerson LC320EM8... | Posted on Oct 14, 2017 | Be the first to answer

1 Answer

Emerson lc320em1 shuts off when midway through the

Are you connecting this to a cable television set top box? If so what type of box is it and make and model number? Also who is the provider?

Emerson LC320EM8... | Answered on Oct 07, 2017

0 Answers

EMERSON 32 Will not turn back on or power up

Emerson LC320EM8... | Posted on Aug 11, 2017 | Be the first to answer

1 Answer

I have an Emerson LC320EM8A tv. I am able to turn

Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Emerson LC320EM8... | Answered on Apr 11, 2017

1 Answer

No picture when connected to cable box with hdmi cable

Try with a scart lead

Emerson LC320EM8... | Answered on Apr 05, 2017

1 Answer

Power issue NEC PX-42VM5A

Most likely a transistor - NEC used FSM series for a while which are now discontinued. Let me know if you need info on how to find/tell which parts are bad.

Emerson LC320EM8... | Answered on Dec 30, 2016

2 Answers

Where is the lamp on my Emerson flatscreen tv

What ur tv problems?Tell me,i will tries to help u.Sorry LCD tvs or Plasma tvs don't have lamps.It have floorestscents bulbs tubes that are intergraded inside to the LCD or Plama screen panels itself.

Emerson LC320EM8... | Answered on Sep 25, 2016

4 Answers

Emerson TV LC320EMXF Remote code for Direc TV

I got the same TV for my stepdaughter and had the same problem. None of the Emerson codes worked. We use Dish Network but I did the autoscan thing on the remote and found that it was 672 which is listed as a Sylvania. I don't know if it will help in your case but maybe try the Sylvania codes. Good luck.

Emerson LC320EM8... | Answered on Jul 28, 2016

1 Answer

Try the code for tv but did not work

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Emerson LC320EM8... | Answered on Feb 25, 2016

1 Answer

How do i activate the usb port of the emerson tv LC32OEM2? I tried to plug in my external hard drive but there are no choices fopr USB? Please Help

that is probably because it is not USB .hdmi and usb are similiar but not same

Emerson LC320EM8... | Answered on Jan 21, 2016

1 Answer

Why doesn't it turn on with the remote or manually?

Could be an open internal fuse or power supply failure

Emerson LC320EM8... | Answered on Jan 14, 2016

0 Answers

How do I connect Apple TV to my TV

Emerson LC320EM8... | Posted on Dec 28, 2015 | Be the first to answer

1 Answer

I fell asleep on my Emerson LC320EMX 32 hdtv remote; when I awoke, the tv was flashing ONLY colors (red, black,blue,white)...Now, How do I get it out of that mode....I was told its stuck in set-mode ?

I had this problem with the LC320EMX, after extensive searching on the internet, I found a solution. The TV has entered some kind of test pattern, to escape from the flashing color test pattern do the following:
While the screen is changing from red,green,Blue,White, & Black, and is Unresposive, Take your factory remote, Press the up arrow, then the down arrow, then (ON THE TV) press the power button. Turn the set back on and it should be functioning properly. (BTW: the set gets into this test pattern if you press too many buttons on the remote, or if you use a universal remote with the wrong code)

Emerson LC320EM8... | Answered on Nov 27, 2015

1 Answer

Sound goes off after it is on for a while.

Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Emerson LC320EM8... | Answered on Nov 22, 2015

1 Answer

I have a emerson tv that i unplugged and moved and now it will not turn back on what is wrong with it

Try to unplug it and hold the power button for 30 secs. If that does not work it would be best to take it to a repair shop. The inside of the tv is very dangerous and if you do not know how to handle high voltage circuits you may injure or kill yourself.

Emerson LC320EM8... | Answered on Oct 17, 2015

0 Answers

Video gone now says component can't play my Wii its black and white and all squiggly

Emerson LC320EM8... | Posted on Mar 24, 2015 | Be the first to answer

1 Answer

Dish Network Remote Codes? Can't seem to get the few I have to work the dish remote

If your remote is a learning remote (has a little black glossy square on the top left side of the remote) you don't need a code, you just need the original remote. Place both remotes on a table, or other flat, sturdy surface, with the original TV remote facing the square on the DISH remote. Make sure both remotes have functioning batteries. On the DISH remote, hold down TV until the button blinks three times, then hold down record (for 5+ seconds) until the TV button lights up and stays on. Then, slowly, for each key you want to use, hit the key on the DISH remote (TV light blinks) then the corresponding key on the original remote (TV light blinks). For example: DISH Volume Up, TV remote Volume Up. When you are done learning all the keys you want to train, hit SAT. The TV light will blink three times, then the SAT light will light up for a moment. Try the DISH remote on your TV functions.

Emerson LC320EM8... | Answered on Mar 16, 2015