Emerson LC320EM8 32 in. LCD TV - Answered Questions & Fixed issues


Remove the connector that goes to the remote board and see if it stays then, if it does that board needs replacing, its not an expensive board, if it still changes on its own then its the main board that is bad, that one is much more money.

Emerson LC320EM8... | Answered on Feb 09, 2018 | 38 views


Are you connecting this to a cable television set top box? If so what type of box is it and make and model number? Also who is the provider?

Emerson LC320EM8... | Answered on Oct 07, 2017 | 165 views


I found a way around this problem. When this happens, don't use the remote.

Walk up to the TV, then HOLD DOWN the power button and while the lights are flashing, start pushing the menu button on the TV at the SAME TIME.

Then your screen will turn on. No idea why this works. Just stumbled on it while getting ********** that this TV, I had less than a month, suddely would not come on anymore. I was about to unplug the whole thing to take back to WalMart and just started pushing button combinations and found this worked.

Emerson LC320EM8... | Answered 2 days ago | 16,264 views


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Emerson LC320EM8... | Answered on Apr 11, 2017 | 88 views


Try with a scart lead

Emerson LC320EM8... | Answered on Apr 05, 2017 | 59 views


What ur tv problems?Tell me,i will tries to help u.Sorry LCD tvs or Plasma tvs don't have lamps.It have floorestscents bulbs tubes that are intergraded inside to the LCD or Plama screen panels itself.

Emerson LC320EM8... | Answered on Sep 25, 2016 | 312 views


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Emerson LC320EM8... | Answered on Feb 25, 2016 | 41 views


Could be an open internal fuse or power supply failure

Emerson LC320EM8... | Answered on Jan 14, 2016 | 84 views


Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Emerson LC320EM8... | Answered on Nov 22, 2015 | 46 views


Try to unplug it and hold the power button for 30 secs. If that does not work it would be best to take it to a repair shop. The inside of the tv is very dangerous and if you do not know how to handle high voltage circuits you may injure or kill yourself.

Emerson LC320EM8... | Answered on Oct 17, 2015 | 90 views


If your remote is a learning remote (has a little black glossy square on the top left side of the remote) you don't need a code, you just need the original remote. Place both remotes on a table, or other flat, sturdy surface, with the original TV remote facing the square on the DISH remote. Make sure both remotes have functioning batteries. On the DISH remote, hold down TV until the button blinks three times, then hold down record (for 5+ seconds) until the TV button lights up and stays on. Then, slowly, for each key you want to use, hit the key on the DISH remote (TV light blinks) then the corresponding key on the original remote (TV light blinks). For example: DISH Volume Up, TV remote Volume Up. When you are done learning all the keys you want to train, hit SAT. The TV light will blink three times, then the SAT light will light up for a moment. Try the DISH remote on your TV functions.

Emerson LC320EM8... | Answered on Mar 16, 2015 | 265 views


Register with Government.

Emerson LC320EM8... | Answered on Feb 24, 2015 | 57 views


First thing to check is the video cable into your TV. Replace it with another. If that doesn't work, go into video settings on the TV and make sure the color setting is correct. If neither of these do the trick, the TV is bad.

Emerson LC320EM8... | Answered on Feb 09, 2015 | 66 views


that is probably because it is not USB .hdmi and usb are similiar but not same

Emerson LC320EM8... | Answered on Jan 21, 2016 | 514 views


it tells you in the manual not spray the screen with any cleaner. there are a few componets water can drip into. unless you understand how to work on a power supply it is going to need a tech for repair.

Emerson LC320EM8... | Answered on Feb 01, 2015 | 103 views


The best brand is one that you like to use. If in doubt get a name brand like a Samsung.

Emerson LC320EM8... | Answered on Dec 13, 2014 | 51 views


For LC320EM3F I used 694. I read somewhere that Emerson makes Funai TVs. This was listed as one of their codes. Worked like a champ.

Emerson LC320EM8... | Answered on Nov 22, 2014 | 502 views


Do a reset to this TV and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
If a Hard Reset do not help you, the main board to this TV is faulty.

Emerson LC320EM8... | Answered on Nov 14, 2014 | 116 views


Try a reset to this TV first. If it do not help you, contact any service technician. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Emerson LC320EM8... | Answered on Oct 21, 2014 | 157 views


0045 0049 0094 0101 0107. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls.Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order.Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Emerson LC320EM8... | Answered on Sep 30, 2014 | 66 views

Not finding what you are looking for?
Emerson LC320EM8 32 in. LCD TV Logo

390 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76173 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...