20 Most Recent Midland LXT410 (14 Channels) 2-Way Radio Questions & Answers


It is likely a fuse inside the radio that is open, or possibly some poor solder connections. I would call whoever you purchased them from and have them take a look.

Midland LXT410... | Answered on Jan 27, 2018


It sounds like a damaged or dirty volume control. I have seen controls where the element inside the control snaps and this sounds like what has happened to your radio. You did not say if the squelch control was set open or closed. If what you are hearing is loud static, I would adjust the squelch control on the radio to see if it stops.

Midland LXT410... | Answered on Jan 22, 2018


Check to see you have the interference eliminator (aka tone code, PL, private line, CTCSS) programmed correctly to match the other units you are talking with.

Midland LXT410... | Answered on May 17, 2009


Here is a link to the owners manual for the LXT-330 420 Series radio:

http://www.hitechwireless.com/pdf/Midland/LXT-330-420 Owners Manual.pdf

I hope this helps.

HiTechWireless.com

Midland LXT410... | Answered on Mar 27, 2009


I think you meant 70-0351c?
I believe this is a 60 watt transceiver. So if you remember ohms law P=IxE or power equals amps times volts so 5 amps times 12 volts equals 60 watts. Use a 5 amp fuse.

Midland Radio... | Answered on Aug 29, 2019


Contact Midland directly to inquire.

Midland Radio... | Answered on Jul 29, 2019


If its a real old radio Midland may not have it---Google that model number with "manual" to see what is available.

Midland Radio... | Answered on May 30, 2019


NOT SOMETHING THAT YOU PROGRAM . YOU JUST TURN IT ON THEN SELECT THE CHANNEL YOU WANT TO USE .

Midland Radio... | Answered on Apr 12, 2019


go to radio shack or best buy you need a step up transformer .or you can buy a travel kit and you dont need a lot of watts transformer to do this dont let them rip you off on a high watt one.

Midland Radio... | Answered on Mar 01, 2019


Yes. They call it silent operation.
To set SILENT OPERATION, press the MENU button until the display shows a "bP" icon. Select "on" or "oF" by pressing the s\t buttons and push the PTT key or MENU button.

Midland Radio... | Answered on Nov 02, 2018


Not on FRS. FRS has only one power level and it's set to low.
GMRS ERP output on the 1050 is approximately 0.4w low; 1.5w mid; and 3.07w High according to operator blogs.

Midland Radio... | Answered on Sep 30, 2018

Not finding what you are looking for?
Midland LXT410 (14 Channels) 2-Way Radio Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Midland Radio Communications

  • Midland Radio Communications

Most Popular Question

set two midland lxt420 made in china

  • Radio Communications
Loading...