20 Most Recent GE JGRP20 Gas Single Oven Questions & Answers


Your problem is with the oven igniter. You have the stove MODEL# so you should have no problem finding the part you need.Shop around to get your best price. Good Luck Friend.

GE JGRP20 Gas... | Answered on Oct 14, 2017


You DO NOT use a oven cleaner with a self cleaning cycle. Wipe out the oven cleaner as instructed on the can. Oven cleaner is better than self clean cycles anyway. Most self clean cycles eventually cause oven control problems.

GE JGRP20 Gas... | Answered on Jul 30, 2014


F3
or
F4
Open or shorted oven temperature sensor
(RTD) Check sensor harness and harness connection between
oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is
ok.

GE JGRP20 Gas... | Answered on Mar 09, 2011


Your bottom heating element most likely went bad. It's easy to replace.

GE JGRP20 Gas... | Answered on Jan 22, 2011


sounds like a bad broil ignitor is it electric or gas if its gas it's the ignitor if its electric the broil element could be bad.

GE JGRP20 Gas... | Answered on Dec 16, 2010


Hi,
In your ovens there is a single oven burner in which case they only have a single gas valve and igniter. The same burner is used for both bake and broil functions, the broil usually being in the drawer area below the oven. The thermostat or the electronic control has gone bad. Usually it’s the thermostat which needs replacements.
Please ask us doubts if any.
Thanks for contacting fixya.com

GE JGRP20 Gas... | Answered on Jan 08, 2010


just call costumer service and they can give you instruction how to do it.or go on line at
www.GE.COM

GE JGRP20 Gas... | Answered on Aug 15, 2009


Check to see if the ignitor glows in the oven. If it does not come on or comes on very dim, you have a bad ignitor. It is usually a bad ignitor. They are very simple to replace. Just unplug the oven first. Then take off the bottom of the oven floor inside the oven to access the ignitor. the ignitor has 2 wires going to a plug, just unplug the plug and remove the mounting screws. Take your ignitor to a local appliance store to get a replacement. There are 2 models of ignitors so bring the old one with you to make sure you get the right one. Good luck..

GE JGRP20 Gas... | Answered on Apr 01, 2009


Check the voltage at the oven gas valve, if you are getting 120v, then you have a bad gas valve.

GE JGRP20 Gas... | Answered on Mar 23, 2009


I just solved this problem with my GE gas range. I waited forever for the oven to warm up. The igniter would glow, light the burner and burn for a minute or so and go out. It would repeat this process till oven reached operating temp, which took forever. Problem is in the igniter. It may be glowing, but it is not letting the gas valve stay open, because it is not hot enough to create resistance in it to keep gas valve open. I had replaced the thermostat thinking it was the problem. The good part about it was I could take it back because my buddy works at supply house. Once the igniter was replaced, the oven fired up and stayed lit till operating temp was reached. It will also hold the oven temp much better. Oh yea, the igniter will stay glowing while the burner is on. Hope this helps.

GE JGRP20 Gas... | Answered on Nov 29, 2008


When your oven reaches the desired temp. it shuts down then turns back on again after it cools down a couple of degrees and cycles like this during the complete baking cycle. If your ignitor or oven valve is getting weak it would cause this symptom.

GE JGRP20 Gas... | Answered on Oct 31, 2007


OPEN THE TOP AND LEARN JUST AS WE DID YEARS AGO

GE Ovens | Answered on Nov 25, 2019

Not finding what you are looking for?
GE JGRP20 Gas Single Oven Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Ovens

  • GE Ovens

Most Popular Question

error code f3

  • Ovens
Loading...