20 Most Recent
- Page 6 Questions & Answers
How to remove the back panel of the interior of a pfss6pkwass ge refrigerator to access the clogged drain tube
Do what I did to my friend when she said hers was blocked. I got the fridge out so the outside end of the drain tube was visible and I could get my mouth on the end, Wrapped kitchen roll round it so as not to mess my lips and said to my friend that she should look closely at the hole in the inside of the fridge AND GET AS CLOSE AS POSSIBLE to it so she could tell me exactly what was going on.
So with her head up to the hole I blew as hard as I could. You can guess what happened... She swore a bit, but she has a good sense of humour and laughed, but she couldn't complain as her fridge drain was clear.
It's a tube - you don't need to undo anything...
on Oct 03, 2019
GE Fridge will not stop flashing zeros diagnostic
I had the same problem. The cause is the digital display is not communicating with the motherboard. What had happened in my case is the plug connection between the door's digital display and the motherboard had become unplugged. The wire running from the motherboard runs below the fridge, and connects via plug located along the bottom of the fridge below the freezer door, connecting to the wire running from the display to the bottom of the freezer door. I just reconnected it and that reset the display. Glad for it too, I thought I needed a new $130 motherboard! Hope this helped!
on Sep 29, 2019
Not finding what you are looking for?